SafePass SSS-5 Infrared Automatic Swing ...

SafePass SSS-5 Infrared Automatic Swing Door Safety Sensor

Supplier: Rotech Automation

SSS-5 Defection Area Adjustments

SafePass SSS-5 Door Sensor Components

Get great value and full swing door safety using only 1 PCB unit. Maximise pedestrian safety through your swing doors with the SSS-5 sensor featuring 6 spots of detection per unit providing pedestrian safety levels exceeding EN16005 standards.

78 Recent Views In Stock

Consistent reliable performance and a high level of safety compliance, the SafePass SSS-5 safety sensor is suitable for all locations such as offices, aged homes, hospitals, where automatic swing door safety is a priority.
Only one SSS-5 PCB unit is required for full safety on each side of the door and provides 800–1,000 mm of safety coverage along the width of the swing door and 900 mm door face coverage.

Six-spot, 800-1,000mm wide, infrared safety curtain with 1 PCB unit
Safety beams can be focused very close to the ground for maximum safety
Externally and internally monitored safety system
Available in 3 different lengths (360mm, 692mm and 1,023mm)
Simple push-button setting of sensor detection distance
Only one PCB unit required for full safety on each side of the door
900mm of door face safety at an installation height of 2.2m
Removable terminal block simplifies wiring and allows installers to use their own desired cable length
Large, robust, internal components aid quick installation
5-Year Warranty against manufacturing defects.

Featuring 6 spots of detection per PCB unit, the SSS-5 provides pedestrian safety levels exceeding EN16005 standards
Removable wiring terminal block and push-button detection distance settings significantly reduce on-site installation time
Solid, tough sensor body design prevents damage due to vandalism or damage during installation
Performs reliably on all floor surfaces and reflective environments, mean time between failure rate of 19.7 years
Able to deal in real-time with changing floor surfaces and floor reflection levels.

Model	SSS-5 Monitored Swing Door Safety Sensor
Detection Method	Infrared Presence Detection with P.S.D. distance measurement
Installation Height	2600mm (8.5ft) Max
Sensor Dimensions	SSS-5S1: 360mm (W), 45mm (H), 45mm (D) SSS-5M1: 692mm (W), 45mm (H), 45mm (D) SSS-5L1: 1,023mm (W), 45mm (H), 45mm (D)
Pattern Adjustment	Beam Angle Adjustment: 5, 10, 15, 20, 25 degrees Detection Distance Adjustment: Dead Zone, 50-500mm Detection Range: 0 – 2.5m (0 – 8ft 2 inches)
Presence Timer	Infinity
IP Rating	54
Power Supply	12 to 24V AC or DC ± 10%
Power Consumption	AC12V-1.7 [VA] (Max), DC12V-95 [mA] AC24V-2.3 [VA] (Max), DC24V-55 [mA]
Output Relay	Relay contact: DC50V 0.1A Non Voltage 1C
Response Speed	Less than 100 msec
Relay Hold Time	0.5 sec
DIP Switch Functions	Test Input: 1 BITOptical Interference: 1 BIT Relay Output Mode: 1 BIT Masking Detection Spots: 2 BIT Detection Range: 3 BIT
Operating Temperature	-20°C to 60°C, (-4°F to 140°F)

Consistent reliable performance and a high level of safety compliance, the SafePass SSS-5 safety sensor is suitable for all locations such as offices, aged homes, hospitals, where automatic swing door safety is a priority.
Only one SSS-5 PCB unit is required for full safety on each side of the door and provides 800–1,000 mm of safety coverage along the width of the swing door and 900 mm door face coverage.

Six-spot, 800-1,000mm wide, infrared safety curtain with 1 PCB unit
Safety beams can be focused very close to the ground for maximum safety
Externally and internally monitored safety system
Available in 3 different lengths (360mm, 692mm and 1,023mm)
Simple push-button setting of sensor detection distance
Only one PCB unit required for full safety on each side of the door
900mm of door face safety at an installation height of 2.2m
Removable terminal block simplifies wiring and allows installers to use their own desired cable length
Large, robust, internal components aid quick installation
5-Year Warranty against manufacturing defects.

Featuring 6 spots of detection per PCB unit, the SSS-5 provides pedestrian safety levels exceeding EN16005 standards
Removable wiring terminal block and push-button detection distance settings significantly reduce on-site installation time
Solid, tough sensor body design prevents damage due to vandalism or damage during installation
Performs reliably on all floor surfaces and reflective environments, mean time between failure rate of 19.7 years
Able to deal in real-time with changing floor surfaces and floor reflection levels.

Model	SSS-5 Monitored Swing Door Safety Sensor
Detection Method	Infrared Presence Detection with P.S.D. distance measurement
Installation Height	2600mm (8.5ft) Max
Sensor Dimensions	SSS-5S1: 360mm (W), 45mm (H), 45mm (D) SSS-5M1: 692mm (W), 45mm (H), 45mm (D) SSS-5L1: 1,023mm (W), 45mm (H), 45mm (D)
Pattern Adjustment	Beam Angle Adjustment: 5, 10, 15, 20, 25 degrees Detection Distance Adjustment: Dead Zone, 50-500mm Detection Range: 0 – 2.5m (0 – 8ft 2 inches)
Presence Timer	Infinity
IP Rating	54
Power Supply	12 to 24V AC or DC ± 10%
Power Consumption	AC12V-1.7 [VA] (Max), DC12V-95 [mA] AC24V-2.3 [VA] (Max), DC24V-55 [mA]
Output Relay	Relay contact: DC50V 0.1A Non Voltage 1C
Response Speed	Less than 100 msec
Relay Hold Time	0.5 sec
DIP Switch Functions	Test Input: 1 BITOptical Interference: 1 BIT Relay Output Mode: 1 BIT Masking Detection Spots: 2 BIT Detection Range: 3 BIT
Operating Temperature	-20°C to 60°C, (-4°F to 140°F)