Novatech Controls Sample Chamber | For ...

Novatech Controls - Sample Chamber | For 1231 Heated Oxygen Probe

Sample Chamber | For 1231 Heated Oxygen Probe

Designed to accomadate a 1231 in-situ oxygen probe for the applications were inserting a probe directly into the process is not possible. Facilitates the measurement of oxygen concentration in high temperature, corrosive or abrasive process gasses.

Hostile Compounds, High Abrasive uses

In Stock

Processes that use external sample chambers

Glass and Ceramic Furnaces: Molten silica and glazing salts will rapidly destroy any in-situ zirconia probe.
PVC Incinerators: Place an acid trap between the process and sample chamber to remove highly acidic compounds from the process gas.
Medical or Toxic Incinerators: High temperatures combined with hostile compounds will rapidly damage any in-situ probes.
Brick Kilns: Hostile and abrasive compounds will result in rapid probe deterioration.

Features of this product

The sample chamber is constructed using 316 stainless steel
Every sample chamber comes complete with a heat shield to prevent accidental contact with the hot surface of the sample chamber.
The mounting bracket is constructed from solid 25 x 6mm 316 stainless steel, welded to the sample chamber in a reinforced tee arrangement. The bracket has been tested to withstand even the worst vibration found on industrial sites.

Why Choose This Product

Less exposure to hostile process gasses also results in increased probe operating life using less expensive ‘off the shelf’ 1231 250mm heated oxygen probes.
By inserting a relatively inexpensive sample tube into the process and extracting a gas sample, accurate oxygen measurement can be achieved while reducing the exposure of the oxygen probe to the abrasive or corrosive process environment.
The oxygen probe can be unscrewed from the sample chamber allowing for easy and fast replacement of the oxygen probe without altering any other process connected plumbing.

Specifications of this product

Gas Connection - 3/8” OD Swagelok tube fittings
Pipe socket to suit probe - 1.5” BSP or NPS
Sample Probe Material - 316 grade Stainless Steel, Inconel wetted parts optional, Wall thickness: 2.77 mm (0.109 inch)
Flow Rate Range - Minimum: 2 litres per minute (LPM), Maximum: 10 LPM

To contact Intelligent Systems Pty Ltd about Novatech Controls Sample Chamber | For 1231 Heated Oxygen Probe use Get a quote.

Processes that use external sample chambers

Glass and Ceramic Furnaces: Molten silica and glazing salts will rapidly destroy any in-situ zirconia probe.
PVC Incinerators: Place an acid trap between the process and sample chamber to remove highly acidic compounds from the process gas.
Medical or Toxic Incinerators: High temperatures combined with hostile compounds will rapidly damage any in-situ probes.
Brick Kilns: Hostile and abrasive compounds will result in rapid probe deterioration.

Features of this product

The sample chamber is constructed using 316 stainless steel
Every sample chamber comes complete with a heat shield to prevent accidental contact with the hot surface of the sample chamber.
The mounting bracket is constructed from solid 25 x 6mm 316 stainless steel, welded to the sample chamber in a reinforced tee arrangement. The bracket has been tested to withstand even the worst vibration found on industrial sites.

Why Choose This Product

Less exposure to hostile process gasses also results in increased probe operating life using less expensive ‘off the shelf’ 1231 250mm heated oxygen probes.
By inserting a relatively inexpensive sample tube into the process and extracting a gas sample, accurate oxygen measurement can be achieved while reducing the exposure of the oxygen probe to the abrasive or corrosive process environment.
The oxygen probe can be unscrewed from the sample chamber allowing for easy and fast replacement of the oxygen probe without altering any other process connected plumbing.

Specifications of this product

Gas Connection - 3/8” OD Swagelok tube fittings
Pipe socket to suit probe - 1.5” BSP or NPS
Sample Probe Material - 316 grade Stainless Steel, Inconel wetted parts optional, Wall thickness: 2.77 mm (0.109 inch)
Flow Rate Range - Minimum: 2 litres per minute (LPM), Maximum: 10 LPM

To contact Intelligent Systems Pty Ltd about Novatech Controls Sample Chamber | For 1231 Heated Oxygen Probe use Get a quote.