Electromagnetic Flowmeter Proline Promag 10D

Electromagnetic Flowmeter

17 Recent Views In Stock

Proline Promag 10D is an electromagnetic flowmeter for bidirectional measurement of conductive liquids. It is used for flow measurements in water or service water applications. Due to its easy installation and operation, its robust design and low price it can be used in applications where only limited principles could be used before. Drinking water approvals according to KTW/W270, WRAS BS 6920, ACS and NSF 61 are available.

Following Faraday's law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. In the electromagnetic measuring principle, the flowing fluid is the moving conductor. By measuring the induced voltage, the flow velocity of the medium can be measured. The flow volume is calculated by means of the pipe cross-section area.

Features include:

High degree of accuracy and measuring stability
No pressure loss, thus energy-saving
Not sensitive to vibrations

Specs at a glance

Function	Continuous flow measurement
Flow measurement	up to 10 m/s (26.4 gal/min)
Minimum conductivity	≥50 µS/cm
Fluid temperature	up to +60 °C (140 °F)
Lining material	Polyamide
Process pressure	up to 16 bar (232 psi)

To contact Endress+Hauser Australia about Electromagnetic Flowmeter Proline Promag 10D use Get a quote.

Features include:

High degree of accuracy and measuring stability
No pressure loss, thus energy-saving
Not sensitive to vibrations

Specs at a glance

Function	Continuous flow measurement
Flow measurement	up to 10 m/s (26.4 gal/min)
Minimum conductivity	≥50 µS/cm
Fluid temperature	up to +60 °C (140 °F)
Lining material	Polyamide
Process pressure	up to 16 bar (232 psi)