Electromagnetic Flowmeter PicoMag

Electromagnetic flowmeter for conductive liquids

26 Recent Views In Stock

Picomag is an electromagnetic flowmeter for bidirectional measurement of conductive liquids. It is used for flow measurements in water or service water applications. Due to its easy installation and operation, its robust design and low price it can be used in applications where only limited principles could be used before.

Following Faraday's law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. In the electromagnetic measuring principle, the flowing fluid is the moving conductor. By measuring the induced voltage, the flow velocity of the medium can be measured. The flow volume is calculated by means of the pipe cross-section area.

Picomag is used for measurement of inlet as well as outlet flow of different applications:

monitoring of cooling circuits
monitoring of cleaning and rinsing water
Secondary circuits for drinking water
Submetering in utility water networks

Features include:

Simultaneous measurement of flow and temperature
Flexible integration into all fieldbus systems via IO-Link
Commissioning and operation via Bluetooth® and SmartBlue App

Specs at a glance

Flow measurement	Up to 10 m/s (26.4 gal/min)
Minimum conductivity	≥20 μS/cm
Fluid temperature	–10 to +70 °C (+14 to +158 °F)
Materials in contact with medium	Stainless steel (1.4404), PEEK, FKM
Process pressure	Max. 16 bar (232 psi)

To contact Endress+Hauser Australia about Electromagnetic Flowmeter PicoMag use Get a quote.

Picomag is used for measurement of inlet as well as outlet flow of different applications:

monitoring of cooling circuits
monitoring of cleaning and rinsing water
Secondary circuits for drinking water
Submetering in utility water networks

Features include:

Simultaneous measurement of flow and temperature
Flexible integration into all fieldbus systems via IO-Link
Commissioning and operation via Bluetooth® and SmartBlue App

Specs at a glance

Flow measurement	Up to 10 m/s (26.4 gal/min)
Minimum conductivity	≥20 μS/cm
Fluid temperature	–10 to +70 °C (+14 to +158 °F)
Materials in contact with medium	Stainless steel (1.4404), PEEK, FKM
Process pressure	Max. 16 bar (232 psi)