Amalgen Isolated and Non Isolated DC DC Converters | Model 6080

Supplier: Dyne Industries

The Amalgen Model 6080 DC/DC non-isolated converter is a high quality 3 Ampere capability switching mode regulator housed in a 22.5 wide standard DIN-rail case.

43 Recent Views In Stock

Input voltage capability is from 56 Volts to within a few volts of the nominated output. Standard outputs offered are 5 volts, 12 volts and 24 Volts as these are the most needed outputs. Special outputs are available. A green LED is provided on the front to indicate output power available.

Specifications:

General specification
Size:	22.5W x 68H x 120D
Mounting:	35mm DIN-rail
Housing:	Polycarbonate
Protection:	IP40
Connections:	Screw terminals
Weight:	175g
Non-Isolated Models
Load regulation:	1% no load to full load
Line regulation:	1% over full input range
Total noise:	50mV R.M.S. max.
Protection:	Input fused
Current limit:	4A approx.
Ambient temp range:	0-55° Celsius
Isolated Models
Input voltage range:	± 10%
Input filter:	PI network
Input protection:	Internal fuse
Output voltage accuracy:	± 4%
Line regulation:	0.6% full input range
Load regulation:	1% no load to full load
Total noise:	25mV R.M.S. max.
Short circuit protection:	Momentary

To contact Dyne Industries about Amalgen Isolated and Non Isolated DC DC Converters | Model 6080 use Get a quote.

Specifications:

General specification
Size:	22.5W x 68H x 120D
Mounting:	35mm DIN-rail
Housing:	Polycarbonate
Protection:	IP40
Connections:	Screw terminals
Weight:	175g
Non-Isolated Models
Load regulation:	1% no load to full load
Line regulation:	1% over full input range
Total noise:	50mV R.M.S. max.
Protection:	Input fused
Current limit:	4A approx.
Ambient temp range:	0-55° Celsius
Isolated Models
Input voltage range:	± 10%
Input filter:	PI network
Input protection:	Internal fuse
Output voltage accuracy:	± 4%
Line regulation:	0.6% full input range
Load regulation:	1% no load to full load
Total noise:	25mV R.M.S. max.
Short circuit protection:	Momentary

Read less...

To contact Dyne Industries about Amalgen Isolated and Non Isolated DC DC Converters | Model 6080 use Get a quote.

Let Dyne Industries provide you with a quote

Supplier

Get a quote

Supplier: Dyne Industries

Distribution: Australia, New Zealand, USA, Worldwide

Location: Bayswater , VIC

Customers: Sydney Water, Schneider, Wilson Transformers, ANCA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Dyne Industries are also proudly displaying these credentials:

Established:

1976

Employees:

6-20

Customers:

Sydney Water, Schneider, Wilson Transformers, ANCA

Memberships:

Australian Industry Group

Certifications:

ISO 9001, ISO 14001 and ISO 45001

Distribution:

Australia, New Zealand, USA, Worldwide