Tronics - Fully Synchronised Labeller 30m/min | S1000 Get latest price

Read more...

To contact Aldus Tronics about Tronics Fully Synchronised Labeller 30m/min | S1000 use Get a quote.

The innovative design of the S1000 means that you can now benefit from a full specification Tronics labelling system even on a limited budget.

The S1000 utilises Tronics’ stepper motor driven label head that has proven its accuracy and reliability in thousands of applications across many industries internationally.

S1000 Features

Durability

Our Tronics S1000 Stand-Alone Pressure Sensitive Labellers were developed for customers who want the durability of our S3 labellers, but are doing more straight-forward simple products.

Efficient Labeling

The Tronics S1000 is ideal for simple flat panel and promotional spot labeling applications. In addition, if changeover is not frequent and you will be running the same or very similar products all day long, then this may be the best fit for your organisation.

Economical Innovation

Although economical, the Tronics S1000 is NOT your typical “Cheap Head-On-A-Stick” pressure sensitive labeller. In fact, this extruded aluminium frame supports Tronics standard S3 label head rated at 30 metres per minute. This means that the S1000 can be upgraded into a S3 at a later date.

Specifications

Maximum Dispensing Speed

30m/min

Minimum Dispensing Speed

5m/min

Label Reel Core Size

76mm inside diameter

Label Reel Outside Diameter

335 maximum

Label Size Vertical

15mm – 215mm

Label Size Horizontal

20mm – 999mm

Label Gap Size Minimum

2.5mm

Label Stop Accuracy

+/- 0.5mm (on dispensing edge)

Right and Left Labelling Heads

Can be left, right, or both

Height Adjustment Side

870mm – 1185mm

Height Adjustment Overhead

900mm – 1050mm

Horizontal Adjustment

0mm – 150mm

Tilt Adjustment

+/- 8 degrees

Read less...

To contact Aldus Tronics about Tronics Fully Synchronised Labeller 30m/min | S1000 use Get a quote.