HT Instruments PV-ISOTEST 1,500V Photovoltaic ...
- Insulation measurement up to 1,500V DC even on live systems
- Localization of the faulty module through the new GFL function
- Continuity of the protective conductor with 200mA
PV-ISOTEST measures the insulation resistance of a single module, a string or even an entire photovoltaic field up to 1,500 V DC in accordance to the IEC/EN62446 standard. Traditional insulation meters would require a DC-rated switch-box to short-circuit the positive and negative terminals of the module/string/PV field under test. With PV-ISOTEST the use of any external device is not required, PV-ISOTEST carries out the measurements in full autonomy and self-sufficiency. In addition, through the new GFL (Ground Fault Locator) function, PV-ISOTEST indicates the position of any poor insulation on a string of the photovoltaic system, due, for example, to water or humidity leakage.
Measurement category |
CAT III 1500V DC / CAT III 1000V AC |
AC TRMS voltage measurement |
3 - 1000V |
DC voltage measurement |
3 - 1500V |
Insulation resistance |
250, 500, 1000, 1500V |
GFL function to locate the fault position in the string |
|
Measurement of polarization index P.I. |
|
Dielectric absorption ratio D.A.R |
|
Continuity of protective conductors with 200mA |
|
Size (LxWxH) (mm) |
235 x 165 x 75mm |
Weight |
1.2kg |
To contact OBIAT Electronics Pty Ltd about HT Instruments PV-ISOTEST 1,500V Photovoltaic Safety Tester use Get a quote.
- Insulation measurement up to 1,500V DC even on live systems
- Localization of the faulty module through the new GFL function
- Continuity of the protective conductor with 200mA
PV-ISOTEST measures the insulation resistance of a single module, a string or even an entire photovoltaic field up to 1,500 V DC in accordance to the IEC/EN62446 standard. Traditional insulation meters would require a DC-rated switch-box to short-circuit the positive and negative terminals of the module/string/PV field under test. With PV-ISOTEST the use of any external device is not required, PV-ISOTEST carries out the measurements in full autonomy and self-sufficiency. In addition, through the new GFL (Ground Fault Locator) function, PV-ISOTEST indicates the position of any poor insulation on a string of the photovoltaic system, due, for example, to water or humidity leakage.
Measurement category |
CAT III 1500V DC / CAT III 1000V AC |
AC TRMS voltage measurement |
3 - 1000V |
DC voltage measurement |
3 - 1500V |
Insulation resistance |
250, 500, 1000, 1500V |
GFL function to locate the fault position in the string |
|
Measurement of polarization index P.I. |
|
Dielectric absorption ratio D.A.R |
|
Continuity of protective conductors with 200mA |
|
Size (LxWxH) (mm) |
235 x 165 x 75mm |
Weight |
1.2kg |
To contact OBIAT Electronics Pty Ltd about HT Instruments PV-ISOTEST 1,500V Photovoltaic Safety Tester use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product