GWEIKE CNC Fiber Laser Cutter for Sheet ...

GWEIKE - CNC Fiber Laser Cutter for Sheet Metal Fabrication | LF3015LN

Supplier: Koenig Machinery

CNC Fiber Laser Cutter for Sheet Metal Fabrication | LF3015LN

Affordable 3015 CNC fiber laser cutter for sheet metal workshops upgrading from plasma. Designed for precision and medium production cutting delivering fast speeds and clean edges with an air-conditioned electronics cabinet for Australian operation

Video for GWEIKE CNC Fiber Laser Cutter for Sheet Metal Fabrication | LF3015LN

Upgrade from Plasma to Fiber

GWEIKE LF3015LN CNC Fiber Laser Cutter

The LF3015LN is a practical, industrial-grade CNC fiber laser designed for sheet metal fabrication workshops upgrading from plasma or bringing laser cutting in-house.

Built around a 3000 × 1500mm single-table platform, this open-bed system delivers fast cutting speeds, clean edge quality and reliable precision — without the cost or complexity of fully enclosed production systems.

Ideal Applications

• Advertising boards
• Indoor and outdoor signage
• Metal labels and data plates
• Machinery panels
• Sheet metal components
• General metal plate processing

Industrial Features That Add Real Value

• 3000 × 1500mm cutting area
(4000×1500, 4000×2000 and 6000×2000mm available)

• Aviation-grade 3rd generation aluminium gantry
Lightweight, strong and optimised for acceleration

• Yaskawa servo motor drive
Stable, high-speed motion control

• Taiwan APEX rack and pinion gear system
Smooth and accurate positioning

• French Moto reducer gear reducer

• German Schneider electrical components

• Automatic lubrication system
Extends mechanical lifespan

• Protective rack and pinion covers

Smart Cutting Technology

• Control screen
Simple and intuitive operation

• CypCut software with nesting capability

• Automatic edge seeking
Detects sheet position for accurate alignment

• Automatic material tracking
Follows slight bends or warped material surfaces

Built for Australian Workshop Conditions

• Separate dust-proof, air-conditioned electronics tower
• Industrial water cooling unit included
• Under-table exhaust and extraction system included

Why Choose the LF3015LN?

If you're searching for an entry-level CNC fiber laser cutter that still delivers industrial performance, the LF3015LN offers:

• Faster cutting than plasma
• Cleaner edges with minimal finishing
• Lower operating costs
• Reliable daily production capability
• Smart automation features typically found in higher-tier systems

It’s a balanced investment — industrial enough for real production, practical enough for growing workshops.

Industrial performance. Smart automation. Practical investment.

Technical Parameters	Specification
Laser Power	1.5kW / 2kW / 3kW / 6kW
Bed Size	3000 x 1500mm (also available in 4000x1500mm, 4000x2000mm, 6000x2000mm)
Machine Size	4600 x 2450 x 1700mm
Laser Source Type	MAX, Raycus or IPG
Laser Head Type	Automatic focusing laser head 1.5–2kW: Raytools BM111 3kW: BOCI BLT421 6kW: BOCI BLT441
Cooling Type	Industrial Water Cooling – S&A water chiller
Moving Speed	80m/min
Acceleration	1.0G
Laser Output Control	0–100% set by software
Drive Method	YYC rack and pinion system, Moto reducer gear reducer, Yaskawa motor drive
Positioning Accuracy	0.02mm
Re-positioning Accuracy	0.02mm
Minimum Line Width	0.1mm
Controlling Software	Cypcut Control System 2000E including nesting, edge seeking and automatic crash protection
Graphic Formats Supported	AI, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software	Illustrator, Photoshop, CorelDraw, AutoCAD, SolidWorks, MaterCam, Type3, Wentai
Colour Separation	Yes (imports colours to control cutting layers)
Auxiliary Equipment	Exhaust fan, Industrial water cooling unit
Power Supply	1.5kW: 380V 50Hz 32A (415V filter supplied) 2kW: 380V 50Hz 40A (415V filter supplied) 3kW: 380V 50Hz 50A (415V filter supplied) 6kW: 415V 50Hz 63A
Gas Regulation	Software-controlled electronic low-pressure O2 regulator High-pressure N2 and compressed air electronic regulator
Gas Connection	O2 (mild steel & copper) – 4 pack minimum, 99.7% purity, 10m³/h max flow, 10 bar max pressure N2 (stainless, aluminium, brass, thin mild steel) – 9 pack minimum, 99.9% purity, 40m³/h max flow, 24 bar max pressure Compressed air – See 18DHY (18 Bar) or 20DHY (20 Bar) compressor options
Working Environment	Temperature: 0–45°C, Humidity: 5–95% (No condensate water)

GWEIKE LF3015LN CNC Fiber Laser Cutter

The LF3015LN is a practical, industrial-grade CNC fiber laser designed for sheet metal fabrication workshops upgrading from plasma or bringing laser cutting in-house.

Ideal Applications

• Advertising boards
• Indoor and outdoor signage
• Metal labels and data plates
• Machinery panels
• Sheet metal components
• General metal plate processing

Industrial Features That Add Real Value

• 3000 × 1500mm cutting area
(4000×1500, 4000×2000 and 6000×2000mm available)

• Aviation-grade 3rd generation aluminium gantry
Lightweight, strong and optimised for acceleration

• Yaskawa servo motor drive
Stable, high-speed motion control

• Taiwan APEX rack and pinion gear system
Smooth and accurate positioning

• French Moto reducer gear reducer

• German Schneider electrical components

• Automatic lubrication system
Extends mechanical lifespan

• Protective rack and pinion covers

Smart Cutting Technology

• Control screen
Simple and intuitive operation

• CypCut software with nesting capability

• Automatic edge seeking
Detects sheet position for accurate alignment

• Automatic material tracking
Follows slight bends or warped material surfaces

Built for Australian Workshop Conditions

• Separate dust-proof, air-conditioned electronics tower
• Industrial water cooling unit included
• Under-table exhaust and extraction system included

Why Choose the LF3015LN?

If you're searching for an entry-level CNC fiber laser cutter that still delivers industrial performance, the LF3015LN offers:

It’s a balanced investment — industrial enough for real production, practical enough for growing workshops.

Industrial performance. Smart automation. Practical investment.

Technical Parameters	Specification
Laser Power	1.5kW / 2kW / 3kW / 6kW
Bed Size	3000 x 1500mm (also available in 4000x1500mm, 4000x2000mm, 6000x2000mm)
Machine Size	4600 x 2450 x 1700mm
Laser Source Type	MAX, Raycus or IPG
Laser Head Type	Automatic focusing laser head 1.5–2kW: Raytools BM111 3kW: BOCI BLT421 6kW: BOCI BLT441
Cooling Type	Industrial Water Cooling – S&A water chiller
Moving Speed	80m/min
Acceleration	1.0G
Laser Output Control	0–100% set by software
Drive Method	YYC rack and pinion system, Moto reducer gear reducer, Yaskawa motor drive
Positioning Accuracy	0.02mm
Re-positioning Accuracy	0.02mm
Minimum Line Width	0.1mm
Controlling Software	Cypcut Control System 2000E including nesting, edge seeking and automatic crash protection
Graphic Formats Supported	AI, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software	Illustrator, Photoshop, CorelDraw, AutoCAD, SolidWorks, MaterCam, Type3, Wentai
Colour Separation	Yes (imports colours to control cutting layers)
Auxiliary Equipment	Exhaust fan, Industrial water cooling unit
Power Supply	1.5kW: 380V 50Hz 32A (415V filter supplied) 2kW: 380V 50Hz 40A (415V filter supplied) 3kW: 380V 50Hz 50A (415V filter supplied) 6kW: 415V 50Hz 63A
Gas Regulation	Software-controlled electronic low-pressure O2 regulator High-pressure N2 and compressed air electronic regulator
Gas Connection	O2 (mild steel & copper) – 4 pack minimum, 99.7% purity, 10m³/h max flow, 10 bar max pressure N2 (stainless, aluminium, brass, thin mild steel) – 9 pack minimum, 99.9% purity, 40m³/h max flow, 24 bar max pressure Compressed air – See 18DHY (18 Bar) or 20DHY (20 Bar) compressor options
Working Environment	Temperature: 0–45°C, Humidity: 5–95% (No condensate water)

Read less...

To contact Koenig Machinery about GWEIKE CNC Fiber Laser Cutter for Sheet Metal Fabrication | LF3015LN use Get a quote.

Let Koenig Machinery provide you with a quote

Supplier

Supplier: Koenig Machinery

Distribution: Australia & New Zealand

Location: Campbellfield , VIC

Customers: Monash University, RMIT University

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Koenig Machinery are also proudly displaying these credentials:

Established:

2014

Employees:

21-50

Customers:

Monash University, RMIT University

Distribution:

Australia & New Zealand

Location:

Campbellfield , VIC

Joined:

Jan 2026