GWEIKE Fiber Laser Cutting Machine | Dual ...

GWEIKE - Fiber Laser Cutting Machine | Dual Table Metal Fiber Laser | LF3015GC

Supplier: Koenig Machinery

Fiber Laser Cutting Machine | Dual Table Metal Fiber Laser | LF3015GC

High-performance 3015 CNC fiber laser cutter built for sheet metal fabrication and manufacturing. Delivers fast cutting speeds, clean edge quality and reliable industrial performance for workshops wanting to increase production efficiency.

Video for GWEIKE Fiber Laser Cutting Machine | Dual Table Metal Fiber Laser | LF3015GC

High-Speed Industrial Metal Cutting

GWEIKE LF3015GC CNC Fiber Laser Cutter

The LF3015GC is an industrial-grade CNC fiber laser cutting machine designed for sheet metal fabrication workshops and manufacturers requiring speed, precision and reliability.

Built around the industry-standard 3000 × 1500mm bed size, this machine suits engineering businesses, enclosure manufacturers, general fabricators and production environments cutting mild steel, stainless steel and aluminium.

If you are upgrading from plasma or expanding your cutting capacity, the LF3015GC delivers clean, accurate results with lower ongoing operating costs.

Key Capabilities

• CNC fiber laser sheet cutting
• High-speed precision profiling
• Complex bracket and component cutting
• Production-ready repeatable parts
• Minimal heat distortion compared to traditional cutting

Designed for Fabrication Workshops

This machine is ideal for:

• General metal fabrication
• Electrical enclosure production
• Automotive component manufacturing
• Engineering workshops
• Structural steel processing
• Production manufacturing environments

Key Features

• 3015 cutting bed (3000 × 1500mm)
• High-speed servo drive system
• Precision rack and pinion motion control
• Automatic focusing laser head
• Clean edge quality with reduced finishing time
• User-friendly CNC control system
• Suitable for mild steel, stainless steel and aluminium

Why Choose the LF3015GC?

• Faster than traditional plasma cutting
• Cleaner edges requiring less secondary work
• Lower running costs than CO2 laser systems
• Scalable power options to match production demands
• Compact industrial footprint

Built for Productivity

With fast acceleration, consistent positioning accuracy and reliable industrial components, the LF3015GC is engineered for Australian manufacturers looking to improve throughput and reduce labour time per job.

Precision cutting. Industrial performance. Production-ready results.

Technical Parameters	Specification
Laser Power	1.5kW / 2kW / 3kW / 6kW
Bed size	3000 x 1500mm with dual loading bed (also available in 4000x1500mm, 4000x2000mm, 6000x2000mm)
Machine Size	845026501860mm
Laser source type	MAX, Raycus or IPG
Laser Head Type	Automatic focussing laser head 1.5-2kW = Raytools BM111 3kW = BOCI BLT421 6kW = BOCI BLT441
Cooling Type	Industrial Water Cooling – S&A water chiller
Moving Speed	120m/min
Acceleration	1.5G
Laser Output Control	0-100% set by software
Drive method	YYC Rack and pinion system, Moto Reducer gear reducer, with Yaskawa motor drive
Positioning Accuracy	0.02 mm
Re-positioning accuracy	0.02mm
Minimum line width	0.1mm
Controlling Software	Cypcut Control System 2000E, including nesting, edge seeking and automatic crash protection
Graphic Format Supported	Graphics files - Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software	Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation	Yes (imports colours to control cutting layers)
Auxiliary Equipment	Exhaust Fan, Industrial water cooling unit
Power Supply	Machine: 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 6kW = 415V 50Hz 63amp
Gas Regulation	Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting)
Gas connection	O2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS
Working Environment	Temperature:0-45C, Humidity 5-95% (No Condensate Water)

GWEIKE LF3015GC CNC Fiber Laser Cutter

The LF3015GC is an industrial-grade CNC fiber laser cutting machine designed for sheet metal fabrication workshops and manufacturers requiring speed, precision and reliability.

If you are upgrading from plasma or expanding your cutting capacity, the LF3015GC delivers clean, accurate results with lower ongoing operating costs.

Key Capabilities

Designed for Fabrication Workshops

This machine is ideal for:

Key Features

Why Choose the LF3015GC?

Built for Productivity

Precision cutting. Industrial performance. Production-ready results.

Technical Parameters	Specification
Laser Power	1.5kW / 2kW / 3kW / 6kW
Bed size	3000 x 1500mm with dual loading bed (also available in 4000x1500mm, 4000x2000mm, 6000x2000mm)
Machine Size	845026501860mm
Laser source type	MAX, Raycus or IPG
Laser Head Type	Automatic focussing laser head 1.5-2kW = Raytools BM111 3kW = BOCI BLT421 6kW = BOCI BLT441
Cooling Type	Industrial Water Cooling – S&A water chiller
Moving Speed	120m/min
Acceleration	1.5G
Laser Output Control	0-100% set by software
Drive method	YYC Rack and pinion system, Moto Reducer gear reducer, with Yaskawa motor drive
Positioning Accuracy	0.02 mm
Re-positioning accuracy	0.02mm
Minimum line width	0.1mm
Controlling Software	Cypcut Control System 2000E, including nesting, edge seeking and automatic crash protection
Graphic Format Supported	Graphics files - Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software	Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation	Yes (imports colours to control cutting layers)
Auxiliary Equipment	Exhaust Fan, Industrial water cooling unit
Power Supply	Machine: 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 6kW = 415V 50Hz 63amp
Gas Regulation	Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting)
Gas connection	O2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS
Working Environment	Temperature:0-45C, Humidity 5-95% (No Condensate Water)

Read less...

To contact Koenig Machinery about GWEIKE Fiber Laser Cutting Machine | Dual Table Metal Fiber Laser | LF3015GC use Get a quote.

Let Koenig Machinery provide you with a quote

Supplier

Supplier: Koenig Machinery

Distribution: Australia & New Zealand

Location: Campbellfield , VIC

Customers: Monash University, RMIT University

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Koenig Machinery are also proudly displaying these credentials:

Established:

2014

Employees:

21-50

Customers:

Monash University, RMIT University

Distribution:

Australia & New Zealand

Location:

Campbellfield , VIC

Joined:

Jan 2026