Chipstar Wood Chipper | 355 MX

Chipstar - Wood Chipper | 355 MX

Supplier: Chipstar Australia

Wood Chipper | 355 MX

Australian built 14'' Wood Chipper designed and manufactured in Melbourne.

In Stock

Standard Features

JCB Diesel Max Tier 3 108hp
Hardened Tool steel knives
Fully Rotational Ejector Chute
High Performance Twin Rim Disc
Lift & Crush System (Twin Hydraulic Ram)
Auto Feed, Reverse Auto, and Feed & Leave
Variable Roller Feed Speed (Feed Rate Governor)
Emergency Stop System (Engine & Rollers)
Fail Safe Lockout On Disc Housing
Auto Feed Anti Stall System
Twin Disc Clutch
Easy Access Removable Covers
Lockable Instrument Box
Rake & Broom Holder
Jockey Wheel
All Controls On Kerbside
Fitted with Safety Knee Bar

Usability

High capacity processing, uniform chipping, and ease of access to the internal mechanics make the TP 400 PTO K the professional choice for forestry chipping. The model is also adjustable enough to accept sliver breakers should finer chipping be required.

Capacity Infeed
Capacity	14″ (355mm)
Feed Rate	Variable 40 lineal metres per minute (max)
Log Feed	Two hydraulic feed rollers Large roller 395mm high by 522mm wide Small roller 216mm high by 522mm wide Twin ram lift and crush with constant 200psi.
Feed Hopper	850mm high by 1400mm wide with fold down tray (tailgate)
Discharge Chute	360 degree rotational hand crank swivel and lift
Chip Size	16mm variable
Infeed Distance	Operator to roller 1540mm
Throat Opening	522mm x 436mm
Roller Blades	12 on top, 16 on bottom Tool Steel
Engine
Standard	JCB Diesel Max Tier 3 108hp
Cooling	Water Cooled
Fuel Tank	100 Litres fitted with level gauge
Air Cleaner	Dual Element with pre cleaner
Mounts	Heavy duty vibration mountings Belt tension by slide rail
Cutting Disc/Housing
Orientation	30° angle cut
Disc	Twin rimmed 1020mm diameter.
Bearings	Twin spherical rollers (easy to replace)
Knives	4 knives of hardened tool steel, reversible and interchangeable 7 1/4″ long x 4″ wide x 3/8″ thick Full width cut across face of anvil
Speed	1600rpm
Anvil	4 sided, adjustable/replaceable
Instrumentation
Standard	Tach/hour meter, key start switch Auto shut-down engine protection Options for oil pressure, water temp gauges and ampmeter Enclosed in a lockable, kerbside, instrumentation box on anti vibration mounts
Drive System
Standard	Twin Disc Clutch
Disc Drive	4 belts
Electrical System
Voltage	12 volt
Lights	LED multivoltage tail, brake, indicator, number plate Warning becon
Timers	Solid state













Braking System
Standard	Electric with breakaway switch
Option	Air/hydraulic
Hydraulic System
Tank	70 litres fitted with level gauge
Motor	400cc
Direct Drive	Piggy back pump, live hydraulics
Controls
Standard	Forward-Neutral-Reverse Wrap around control bar Flow control to vary roller speed Hydraulic lift and crush from both sides Manual pump up top roller Auto feed, anti-stall system Timed electronic safety switch on disk housing
Options	Hydraulic discharge chute Winch and twin axle
Trailer
Weight	3200kg
Length	5100mm (tailgate closed)
Height	2760mm
Width	2140mm
Operating Height	650mm
Jockey Wheel	800kg retractable
Axle	3.2 tonne single
Wheels	125 x 6.5 2 piece rims
Tyres	750R15(16) 853 (mounted spare wheel)
Rake/Broom Holder	Standard
Tow Hitch	Ring coupling (options available)
Finish
Colour	Powder coated
Warranty/Manuals
Warranty	24 months limited against defective materials, design and workmanship
Manuals	Operator, Hazard assessment, maintenance and spares

To contact Chipstar Australia about Chipstar Wood Chipper | 355 MX use Get a quote.

Standard Features

JCB Diesel Max Tier 3 108hp
Hardened Tool steel knives
Fully Rotational Ejector Chute
High Performance Twin Rim Disc
Lift & Crush System (Twin Hydraulic Ram)
Auto Feed, Reverse Auto, and Feed & Leave
Variable Roller Feed Speed (Feed Rate Governor)
Emergency Stop System (Engine & Rollers)
Fail Safe Lockout On Disc Housing
Auto Feed Anti Stall System
Twin Disc Clutch
Easy Access Removable Covers
Lockable Instrument Box
Rake & Broom Holder
Jockey Wheel
All Controls On Kerbside
Fitted with Safety Knee Bar

Usability

Capacity Infeed
Capacity	14″ (355mm)
Feed Rate	Variable 40 lineal metres per minute (max)
Log Feed	Two hydraulic feed rollers Large roller 395mm high by 522mm wide Small roller 216mm high by 522mm wide Twin ram lift and crush with constant 200psi.
Feed Hopper	850mm high by 1400mm wide with fold down tray (tailgate)
Discharge Chute	360 degree rotational hand crank swivel and lift
Chip Size	16mm variable
Infeed Distance	Operator to roller 1540mm
Throat Opening	522mm x 436mm
Roller Blades	12 on top, 16 on bottom Tool Steel
Engine
Standard	JCB Diesel Max Tier 3 108hp
Cooling	Water Cooled
Fuel Tank	100 Litres fitted with level gauge
Air Cleaner	Dual Element with pre cleaner
Mounts	Heavy duty vibration mountings Belt tension by slide rail
Cutting Disc/Housing
Orientation	30° angle cut
Disc	Twin rimmed 1020mm diameter.
Bearings	Twin spherical rollers (easy to replace)
Knives	4 knives of hardened tool steel, reversible and interchangeable 7 1/4″ long x 4″ wide x 3/8″ thick Full width cut across face of anvil
Speed	1600rpm
Anvil	4 sided, adjustable/replaceable
Instrumentation
Standard	Tach/hour meter, key start switch Auto shut-down engine protection Options for oil pressure, water temp gauges and ampmeter Enclosed in a lockable, kerbside, instrumentation box on anti vibration mounts
Drive System
Standard	Twin Disc Clutch
Disc Drive	4 belts
Electrical System
Voltage	12 volt
Lights	LED multivoltage tail, brake, indicator, number plate Warning becon
Timers	Solid state













Braking System
Standard	Electric with breakaway switch
Option	Air/hydraulic
Hydraulic System
Tank	70 litres fitted with level gauge
Motor	400cc
Direct Drive	Piggy back pump, live hydraulics
Controls
Standard	Forward-Neutral-Reverse Wrap around control bar Flow control to vary roller speed Hydraulic lift and crush from both sides Manual pump up top roller Auto feed, anti-stall system Timed electronic safety switch on disk housing
Options	Hydraulic discharge chute Winch and twin axle
Trailer
Weight	3200kg
Length	5100mm (tailgate closed)
Height	2760mm
Width	2140mm
Operating Height	650mm
Jockey Wheel	800kg retractable
Axle	3.2 tonne single
Wheels	125 x 6.5 2 piece rims
Tyres	750R15(16) 853 (mounted spare wheel)
Rake/Broom Holder	Standard
Tow Hitch	Ring coupling (options available)
Finish
Colour	Powder coated
Warranty/Manuals
Warranty	24 months limited against defective materials, design and workmanship
Manuals	Operator, Hazard assessment, maintenance and spares