Yamato Laboratory Incubator | IJ101

Yamato - Laboratory Incubator | IJ101

Laboratory Incubator | IJ101

Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)

10 Recent Views In Stock

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)

Highly functional fixed temp. incubator with varying capacity.
A compact model ideal for preserving samples and for constant temperature testing
A CFC-free, low-vibration model with a cooler equipped with peltier elements
Uses a programmable temperature controller (IJ201/300)
Has a convenient pre-reset temperature function ( as an option)
Air jacket can be attached as an option
Two units can be stacked by the stacking support (Option)
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Item Code	221164
Model	IJ101
Type	Forced convection
Operating Temperature Range	5~60?(at room temp.25?)
Temp. Control Accuracy	±0.3?(at 37?)
Temp. Distribution Accuracy	±1.0?(at 37?)
Time to Max. Temp.	20~60? 60min.
Time to Lowest Temp.	20~5? 100min.
Interior	Stainless steel
Heater	Mica heater 120W
Condenser	Peltiert element, Forced radiation type
Temp. Control Method	PID
Operation Function	Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions	Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor	Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions	Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity	Approx. 5kg/ shelf
Shelf Step	7 steps
Accessories	Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Internal dimensions(W×D×H mm)	250×250×250mm
External dimensions(W×D×H mm)	350×399×565mm
Remarks(dimensions)	15.6L
Power Source	AC115V/AC220V single phase with step-down transformer
Weight	20kg

Maintenance and Warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

To contact Banksia Scientific Company about Yamato Laboratory Incubator | IJ101 use Get a quote.

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)

Highly functional fixed temp. incubator with varying capacity.
A compact model ideal for preserving samples and for constant temperature testing
A CFC-free, low-vibration model with a cooler equipped with peltier elements
Uses a programmable temperature controller (IJ201/300)
Has a convenient pre-reset temperature function ( as an option)
Air jacket can be attached as an option
Two units can be stacked by the stacking support (Option)
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Item Code	221164
Model	IJ101
Type	Forced convection
Operating Temperature Range	5~60?(at room temp.25?)
Temp. Control Accuracy	±0.3?(at 37?)
Temp. Distribution Accuracy	±1.0?(at 37?)
Time to Max. Temp.	20~60? 60min.
Time to Lowest Temp.	20~5? 100min.
Interior	Stainless steel
Heater	Mica heater 120W
Condenser	Peltiert element, Forced radiation type
Temp. Control Method	PID
Operation Function	Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions	Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor	Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions	Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity	Approx. 5kg/ shelf
Shelf Step	7 steps
Accessories	Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Internal dimensions(W×D×H mm)	250×250×250mm
External dimensions(W×D×H mm)	350×399×565mm
Remarks(dimensions)	15.6L
Power Source	AC115V/AC220V single phase with step-down transformer
Weight	20kg