Verlinde - VR Electric Chain Hoists

VR Electric Chain Hoists

Compact electric chain hoist for loads from 63kg to 5,000kg

In Stock

Completely pioneering high-end design, its fluid, contemporary and slender lines affirm the power of this electric chain hoist. This new generation of Verlinde VR hoist results from innovative technology, new materials and operating concepts – is adaptable to each specific need.

The EUROCHAIN VR electric chain hoist is designed to provide users with the maximum level of safety. It is delivered with the following equipment as standard:

New concept of lifting nuts with intermedVerlinde VR Hoist with Motorised Trolleyiate teeth for perfect chain drive
Torque limiter
Lifting disc brake
Standard lifting height 3m
Two-speed lifting
Electrical safety limit switch for high and low positions
IP55 lifting and steering motor
Thermal protection on lifting motor
Tropicalized protection (lifting and steering – from 90 to 95%)
Galvanized lifting chain
Detachable control cable
2-button box on fixed hoist or with push-steering trolley
4-button box on hoist coupled to electrically steering trolleyVerlinde VR25 Hoist with Motorised Trolley
Emergency stop button “Mushroom”
Power supply 400V / 3Ph / 50Hz or 415V / 3Ph / 50 Hz or 460V / 3 Ph / 60 Hz
48 V ELV control voltage
Chain box
70µm epoxy powder paint, RAL 7021
Speed variation in direction – MS mode (for hoists equipped with an electric trolley)
Complies with the EC Machinery Directive

To contact Eurocrane Australia about Verlinde VR Electric Chain Hoists use Get a quote.

The EUROCHAIN VR electric chain hoist is designed to provide users with the maximum level of safety. It is delivered with the following equipment as standard:

New concept of lifting nuts with intermedVerlinde VR Hoist with Motorised Trolleyiate teeth for perfect chain drive
Torque limiter
Lifting disc brake
Standard lifting height 3m
Two-speed lifting
Electrical safety limit switch for high and low positions
IP55 lifting and steering motor
Thermal protection on lifting motor
Tropicalized protection (lifting and steering – from 90 to 95%)
Galvanized lifting chain
Detachable control cable
2-button box on fixed hoist or with push-steering trolley
4-button box on hoist coupled to electrically steering trolleyVerlinde VR25 Hoist with Motorised Trolley
Emergency stop button “Mushroom”
Power supply 400V / 3Ph / 50Hz or 415V / 3Ph / 50 Hz or 460V / 3 Ph / 60 Hz
48 V ELV control voltage
Chain box
70µm epoxy powder paint, RAL 7021
Speed variation in direction – MS mode (for hoists equipped with an electric trolley)
Complies with the EC Machinery Directive