The SAE 32 uses 40% less solvent and lasts up to 2-3 times longer.

In Stock

The SAE 32 parts washer and degreaser is a manual parts washer that's ideal for small automotive mechanical workshops not yet ready to go fully automatic. It can be used for cleaning auto parts up to 32" in length.

Low operating costs - 40% less solvent - 2-3 times longer solvent life
Low maintenance - No messy mechanical filters
Heavy duty 16 gauge steel construction with Hinged Anti Fire lid for safety
Baked durethane finish with Polyethylene drum
Approved fusible link with weather proof switch
Securely locked to base so will not tip over
Versatile - rinse or soak, fixed or mobile

Technical Characteristics
Length	32" - 813mm
Width	22" - 559mm
Depth	10" - 254mm
Height: - closed	37" - 940mm
Height: - open	60" - 1524mm
Drum Capacity	95 Litres
Solvent Required	60 Litres
Weight: Tub Fittings	31 Kilos
Weight: Solvent Drum	8 Kilos
Electrics	240 Volt. 50 Cycle

The washer uses a solvent to loosen the dirt, grime, oil or carbon from the engine parts.

This economical parts washer uses 40% less solvent than competitors and because of its unique water filtration system the solvent lasts 2- 3 times longer than competitive parts washers.

The SAE 32 parts washer is made in Australia from long lasting welded 16 gauge steel finished in baked Durethane sitting on a 95 litre capacity polyethylene drum.

To contact AMDS Trade & Industrial about Solvent Sink | SAE32 use Get a quote.

Low operating costs - 40% less solvent - 2-3 times longer solvent life
Low maintenance - No messy mechanical filters
Heavy duty 16 gauge steel construction with Hinged Anti Fire lid for safety
Baked durethane finish with Polyethylene drum
Approved fusible link with weather proof switch
Securely locked to base so will not tip over
Versatile - rinse or soak, fixed or mobile

Technical Characteristics
Length	32" - 813mm
Width	22" - 559mm
Depth	10" - 254mm
Height: - closed	37" - 940mm
Height: - open	60" - 1524mm
Drum Capacity	95 Litres
Solvent Required	60 Litres
Weight: Tub Fittings	31 Kilos
Weight: Solvent Drum	8 Kilos
Electrics	240 Volt. 50 Cycle

The washer uses a solvent to loosen the dirt, grime, oil or carbon from the engine parts.

This economical parts washer uses 40% less solvent than competitors and because of its unique water filtration system the solvent lasts 2- 3 times longer than competitive parts washers.

The SAE 32 parts washer is made in Australia from long lasting welded 16 gauge steel finished in baked Durethane sitting on a 95 litre capacity polyethylene drum.

Read less...

To contact AMDS Trade & Industrial about Solvent Sink | SAE32 use Get a quote.