SaniForce High Sanitation Diaphragm Pump ...

SaniForce - High Sanitation Diaphragm Pump | 1590 3A

Supplier: Graco Australia

High Sanitation Diaphragm Pump | 1590 3A

1-1/2 inch air-operated double diaphragm sanitary pump with flow rates up to 90 gpm (341 lpm). 3A certified for the dairy industry.

13 Recent Views In Stock

FEATURES

SaniForce 1590 3A High Sanitation Diaphragm Pump:

Pumps up to 90 gallons per minute (341 lpm)
Pump rotates 360º for easy draining
Certified by 3A for dairy applications
Features our lube free, non-sticking air valve
Transfer product from a variety of containers to smaller receptacles - up to 15,000 cps
Suitable to pump products such as: flowable sour cream, yogurt and light-viscosity cheeses

Designed to detect leaks!

Electronic leak detector is standard on 3A models
Designed to detect leaks caused when a diaphragm fails
Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
Uses an optical and conductivity sensor to ensure the utmost reliability
Powered by either 24v or 110/220v

EPDM Overmolded Diaphragms:

Approved for 3A applications
Easy cleaning with smooth, flat surfaces and no recessed areas
No exposed diaphragm plates to reduce contaminant collection

SPECIFICATIONS

SaniForce 1590 HS and 1590 3A Diaphragm Pumps
Maximum fluid working pressure	8 bar, 0.8 MPa
Air pressure operating range	1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption	3.5 m³/minute
Air consumption at 70 psi, 60 gpm	1.4 m³/minute
Maximum free-flow delivery	378 lpm
Maximum pump speed	200 cpm
Gallons/liters per cycle*	2.0 l
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)	8.5 m wet, 4.6 m dry
Maximum size pumpable solids	15.9 mm
Air inlet size	0.5 in npt(f)
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow	90 dB(A)
Sound power level	103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm	85dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings
PTFE	104°C
Santoprene®	82°C
3A Approved EPDM	135°C
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models	316 stainless steel, 3A Approved EPDM, PTFE
Wetted materials depending on model	3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts	300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models	44 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. * The pump user must verify that the construction materials meet their specific application requirements.

To contact Graco Australia about SaniForce High Sanitation Diaphragm Pump | 1590 3A use Get a quote.

FEATURES

SaniForce 1590 3A High Sanitation Diaphragm Pump:

Pumps up to 90 gallons per minute (341 lpm)
Pump rotates 360º for easy draining
Certified by 3A for dairy applications
Features our lube free, non-sticking air valve
Transfer product from a variety of containers to smaller receptacles - up to 15,000 cps
Suitable to pump products such as: flowable sour cream, yogurt and light-viscosity cheeses

Designed to detect leaks!

Electronic leak detector is standard on 3A models
Designed to detect leaks caused when a diaphragm fails
Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
Uses an optical and conductivity sensor to ensure the utmost reliability
Powered by either 24v or 110/220v

EPDM Overmolded Diaphragms:

Approved for 3A applications
Easy cleaning with smooth, flat surfaces and no recessed areas
No exposed diaphragm plates to reduce contaminant collection

SPECIFICATIONS

SaniForce 1590 HS and 1590 3A Diaphragm Pumps
Maximum fluid working pressure	8 bar, 0.8 MPa
Air pressure operating range	1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption	3.5 m³/minute
Air consumption at 70 psi, 60 gpm	1.4 m³/minute
Maximum free-flow delivery	378 lpm
Maximum pump speed	200 cpm
Gallons/liters per cycle*	2.0 l
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)	8.5 m wet, 4.6 m dry
Maximum size pumpable solids	15.9 mm
Air inlet size	0.5 in npt(f)
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow	90 dB(A)
Sound power level	103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm	85dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings
PTFE	104°C
Santoprene®	82°C
3A Approved EPDM	135°C
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models	316 stainless steel, 3A Approved EPDM, PTFE
Wetted materials depending on model	3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts	300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models	44 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. * The pump user must verify that the construction materials meet their specific application requirements.