23 Recent Views In Stock

The DS260 can achieve up to SIL3/PLe when combined with a SIL3/PLe certified sensor. The speed monitor is equipped with one incremental input (HTL differential, HTL single ended, RS422), a signal distributor and has cable break monitoring.

SIL3 and PLe certification (depends ofn the used encoder / sensor arrangement)
Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
1 incremental encoder input with format A, /A, B, /B, Z, /Z
[HTL differential, HTL single ended, RS422]
8 control inputs [HTL / PNP]
Input frequency up to 500 kHz
2 relay outputs 5... 250 VAC / VDC (NO)
4 x 2 control outputs with push-pull characteristic, short-circuit-proof,
Safety related 14 bit analog output for 4 ... 20 mA (scalable)
Signal splitter
Power supply 18 ... 30 V
Sensor Signal, wire break monitoring

Add-on Option: BG200: Plug-in Display Unit
Alternative: DS250: Same performance but up to SIL3/PLe with two independent, non-certified sensors and two incremental encoder Inputs.

To contact Plant Control and Automation about Motrona Safety Controller | DS260 use Get a quote.

SIL3 and PLe certification (depends ofn the used encoder / sensor arrangement)
Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
1 incremental encoder input with format A, /A, B, /B, Z, /Z
[HTL differential, HTL single ended, RS422]
8 control inputs [HTL / PNP]
Input frequency up to 500 kHz
2 relay outputs 5... 250 VAC / VDC (NO)
4 x 2 control outputs with push-pull characteristic, short-circuit-proof,
Safety related 14 bit analog output for 4 ... 20 mA (scalable)
Signal splitter
Power supply 18 ... 30 V
Sensor Signal, wire break monitoring

Add-on Option: BG200: Plug-in Display Unit
Alternative: DS250: Same performance but up to SIL3/PLe with two independent, non-certified sensors and two incremental encoder Inputs.

Read less...

To contact Plant Control and Automation about Motrona Safety Controller | DS260 use Get a quote.