The Jug-A-0 is an explosion protected (AS3584.2), diesel powered four wheel drive Utility Vehicle, powered by an 8 litre super-charged Hino engine with a load sense hydraulic system with lifting capacities of either 10,000 kg or 12,000 kg.

In Stock

As Utility Vehicles go, the Jug-A-0 is efficiency in motion. Production maximiser, user friendly and importantly maintenance friendly are words often used to describe a JUG-A-0. It is the right Utility Vehicle for your needs. The diesel engine incorporates 122kW of power, with 625 Nm of torque. It is also the cleanest and quietest (operating at <85 decibels) diesel engine system on the market, possessing superior operating visibility and incorporating an adjustable hydraulic canopy.

Product Specifications:

General – JUG-A-0 Z Series
Manufacturer	VLI Diesel Pty Ltd
Model	Z1210 & Z1060
Tare mass of wet complete machine (kg)	20,000kg
Economic life of Equipment (hours)	24,000HRS
Performance Details
Maximum seating capacity (including driver)	1
Ground pressure (kPa) – engine end (loaded at seated capacity)	1300kPa
Ground pressure (kPa) – rear end (loaded at seating capacity)	640kPa
Maximum tractive effort (kg) – coal ground (wet / dry)	17500kg
Maximum tractive effort (kg) – concrete (wet / dry)	19500kg
Machine speed (km/h) – top gear, no load	25kmph
Machine speed (km/h) – low gear carrying rated capacity up 1 in 10 grade	5kmph
Maximum Payload (kg)	12,000kg (at MIS Plate)
Equipment Dimensions
Machine length (mm)	9350mm
Machine width (mm)	2400mm
Machine height (mm)	1700-2200mm
Machine wheel base (mm)	2885mm
Machine track width (mm) – outside of wheels	2240mm
Machine turning circle (mm)	6950mm (with bucket)
Machine nominal ground clearance (mm)	370mm
Engine Details
Type	Explosion Protected Diesel Engine System
Make and model	VLI Supercharged Hino JO8C
Displacement (litre)	7.96 Litre
Maximum power (kW @ rpm)	122kW
Maximum torque (Nm @ rpm)	625Nm
Low idle speed (rpm)	1000rpm
High idle speed (rpm)	2400rpm
Maximum power speed (rpm)	2100rpm
Fuel tank working capacity (litres)	175 Litres
Fuel consumption at maximum power (litres / hour)	33 Litres/hour
Exhaust system type	Explosion Protected Wet
Exhaust scrubber water tank capacity (litres)	195 Litres
Scrubber water consumption at maximum power (litres / hour)	158 Litres/Hour
Drive Train System Details
Transmission type	Powershift
Make and model	Dana R32421
Gear ratios	4.64 : 2.23 : 1.29 : 0.75
Torque converter type	Single Element
Make and model	Dana C273.1
Axle make and model – front	Kessler
Axle make and model – rear	Kessler
Wheels make and model	VLI
Wheel type and size	17.5″x25″
Wheel mass (kg)	Solid Filled
Hydraulic System
Pump type	Variable Displacement Load Sensing
Pump capacity (l/min @ rpm)	280 l/min @ 2200 rpm
System operating pressure (kPa)	19,995 kPa max
Brakes
Service Brake
Type	Multiplate Wet
Make and model	Kessler
Application	Pressure Applied
Brake unit location	Wheel Hub
Park Brake
Type	Multiplate Wet
Make and model	Kessler
Application	SAHR
Brake unit location	Wheel Hub
Noise Levels
Noise levels operating underground for standard machine (dBA):	85 dBa (AS1269 & AS2706)
Electrical System
Voltage (V)	12 Volt
Alternator make and model	ATF/MAE/MR
Alternator rating	Explosion Protected
Lighting system	ATF/MAE/Setco
Gas monitoring system	VLI/NTMS

To contact VLI Conveyor about Mining Dozer | JUG-A-O use Get a quote.

Product Specifications:

General – JUG-A-0 Z Series
Manufacturer	VLI Diesel Pty Ltd
Model	Z1210 & Z1060
Tare mass of wet complete machine (kg)	20,000kg
Economic life of Equipment (hours)	24,000HRS
Performance Details
Maximum seating capacity (including driver)	1
Ground pressure (kPa) – engine end (loaded at seated capacity)	1300kPa
Ground pressure (kPa) – rear end (loaded at seating capacity)	640kPa
Maximum tractive effort (kg) – coal ground (wet / dry)	17500kg
Maximum tractive effort (kg) – concrete (wet / dry)	19500kg
Machine speed (km/h) – top gear, no load	25kmph
Machine speed (km/h) – low gear carrying rated capacity up 1 in 10 grade	5kmph
Maximum Payload (kg)	12,000kg (at MIS Plate)
Equipment Dimensions
Machine length (mm)	9350mm
Machine width (mm)	2400mm
Machine height (mm)	1700-2200mm
Machine wheel base (mm)	2885mm
Machine track width (mm) – outside of wheels	2240mm
Machine turning circle (mm)	6950mm (with bucket)
Machine nominal ground clearance (mm)	370mm
Engine Details
Type	Explosion Protected Diesel Engine System
Make and model	VLI Supercharged Hino JO8C
Displacement (litre)	7.96 Litre
Maximum power (kW @ rpm)	122kW
Maximum torque (Nm @ rpm)	625Nm
Low idle speed (rpm)	1000rpm
High idle speed (rpm)	2400rpm
Maximum power speed (rpm)	2100rpm
Fuel tank working capacity (litres)	175 Litres
Fuel consumption at maximum power (litres / hour)	33 Litres/hour
Exhaust system type	Explosion Protected Wet
Exhaust scrubber water tank capacity (litres)	195 Litres
Scrubber water consumption at maximum power (litres / hour)	158 Litres/Hour
Drive Train System Details
Transmission type	Powershift
Make and model	Dana R32421
Gear ratios	4.64 : 2.23 : 1.29 : 0.75
Torque converter type	Single Element
Make and model	Dana C273.1
Axle make and model – front	Kessler
Axle make and model – rear	Kessler
Wheels make and model	VLI
Wheel type and size	17.5″x25″
Wheel mass (kg)	Solid Filled
Hydraulic System
Pump type	Variable Displacement Load Sensing
Pump capacity (l/min @ rpm)	280 l/min @ 2200 rpm
System operating pressure (kPa)	19,995 kPa max
Brakes
Service Brake
Type	Multiplate Wet
Make and model	Kessler
Application	Pressure Applied
Brake unit location	Wheel Hub
Park Brake
Type	Multiplate Wet
Make and model	Kessler
Application	SAHR
Brake unit location	Wheel Hub
Noise Levels
Noise levels operating underground for standard machine (dBA):	85 dBa (AS1269 & AS2706)
Electrical System
Voltage (V)	12 Volt
Alternator make and model	ATF/MAE/MR
Alternator rating	Explosion Protected
Lighting system	ATF/MAE/Setco
Gas monitoring system	VLI/NTMS