iSTS Static Power - iSurface Model F3 Get latest price

Read more...

To contact Static Power about iSTS Static Power iSurface Model F3 use Get a quote.

Features of this product

• Surface mounted, Industrial Enclosure
• Natural Air Cooled
• IP54 - 55°C ambient
• Single, 3-phase, 3 or 4-pole
• Built-in transient voltage protection
• UPS Eco-Mode compatible
• RCD site compatibility
• Safe asynchronous source transfers
• Very high MTBF (>800,000 hours)
• Manual and automatic transfers selection
• Maintenance Bypass pad-lockable
• Preferred source selection
• Visual and sound alarms
• Bi-colour LED mimic
• 5 off Voltage free alarm contacts
• Remote transfer inputs
• HLI (Modbus, HTTP, SNMP, Email Alert, NTP)
• Australian designed & manufactured

Specifications of this product

• Current rating	1Ph: 125A max 3Ph: 63A max
  Voltage rating	All region-specific voltages ±10%
  Type	Single phase, 3-Phase/3-Pole or 3-Phase/4-Pole
  Frequency	50Hz and 60Hz, ±10% - Auto detection
  Transfer type	Break-Before-Make zero current transfer by Thyristors / SCR
  Synchronous break time	<1ms - up to ¼ cycle
  MTBF	>800,000 hours
  Maintenance bypass	3-position overlapping, no-break CAM switch
  Isolation	Incoming sources isolator switches
  Display	Bi-colour LED mimic decal
  Interface	Preferred supply selection, Source transfer selection and Alarm cancel button
  Contact	2 Self wetting transfer control inputs 5 Pre-defined Voltage free change-over status indicators, Form C
  Ethernet	HTTP, SNMP, MODBUS TCP, Email & NTP - Modbus RTU Optional
  Input termination	Lugged fixed wiring to M6/M8 terminals via glands
  Output termination	Lugged fixed wiring to M6/M8 terminals via glands
  Dimensions H x W x D	H600 x W400 x D210 mm
  Weight	34kg
  Temperature	0 – 55°C
  IP rating	IP54
  Detection	Digital: <1ms
  Asynchronous break time	0ms, 10ms, 50ms or Vt proportional, 0° to 180°
  Loading	0 - 100% @55°C ambient
  Device ratings	134ARMS, 1600V, 2kA 1 cycle
  Overload @55°C ambient		110% for 10min 125% for 2min 150%  for 60s	200% for 30s 400% for 0.1s 2kA for 1 cycle
  Fault current setting	300% peak with load fault transfer inhibit
  Safe install environment	20kA, 100A/200A internally fused
  Protection	100A/200A fuses - BS88/FE100
  Power factor	No practical limit
  Max THDV	10% - Max allowable source voltage distortion
  Crest factor	3 : 1
  dV/dt max	800V/μs
  Cooling	Natural
  Humidity @40°C ambient	5 – 95% non-condensing

Read less...

To contact Static Power about iSTS Static Power iSurface Model F3 use Get a quote.