HRS Plate Heat Exchangers | Brazed

HRS - Plate Heat Exchangers | Brazed

Supplier: HRS Heat Exchangers

Plate Heat Exchangers | Brazed

The HRS Brazed Plate Heat Exchanger range works on the same principle as conventional plate heat exchangers, but consists of a pack of corrugated plates joined together and sealed by furnace brazing.

10 Recent Views In Stock

Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to 400°C, then nickel is used. The plates are manufactured as standard from high-grade AISI 316 acid resistant steel with a thickness of either 0.35mm or 0.4mm dependent on the model type.

HRS brazed plate heat exchangers are suitable for heat recovery in the chemical, pharmaceutical, biotechnology and power generation industries, environmental processes and other industries.

To contact HRS Heat Exchangers about HRS Plate Heat Exchangers | Brazed use Get a quote.

Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to 400°C, then nickel is used. The plates are manufactured as standard from high-grade AISI 316 acid resistant steel with a thickness of either 0.35mm or 0.4mm dependent on the model type.

HRS brazed plate heat exchangers are suitable for heat recovery in the chemical, pharmaceutical, biotechnology and power generation industries, environmental processes and other industries.

Read less...

To contact HRS Heat Exchangers about HRS Plate Heat Exchangers | Brazed use Get a quote.