Testing and inspection for all central and single-point emergency lighting systems.

42 Recent Views Call for more details

Emergency and Exit Light Testing & Inspection Requirements Australian/New Zealand Standard AS/NZS 2293:1995.
Emergency escape lighting and exit signs for buildings

Part 2: Inspection and maintenance

The Standard sets out the periodic inspection and maintenance procedures which are necessary to ensure that emergency evacuation lighting systems will be in a state of readiness for operation at all times.

The Standard instructs that all Emergency evacuation lighting systems shall be inspected and maintained in accordance with the relevant procedures specified in the Standard and that the inspection and maintenance procedures shal be caried out only by persons having qualifications and experience suitable for this type of work.

All maintenance records must be in the form of hard copy record tags or log books. Electronic copies may also be used.

Six Monthly Procedures

Visual checks of all emergency and exit lights in mains operation.
Check for operation of maintained exit lights and replace faulty lamps where required.
Where manual discharge test facility is present, operate the test switch and/or circuit breaker to simulate a power failure.
The emergency lighting system shall remain illuminated for not less than 90 minutes.
Restore the emergency and exit lights to normal charging condition.
Check operation of all maintained exit lights and all charge indicators.
Report any failures and record data in on site manuals.
Record data in electronic format for auditing processes.

Twelve Monthly Procedures

Carry out all checks as per six-monthly procedures.
Clean all emergency and exit lighting diffusers as required.
Visual checks to ensure that the emergency lighting system operates in correct relationship to the normal lighting in any designated area.

To contact Perth TT about Exit Sign Testing & Inspection use Get a quote.

Emergency and Exit Light Testing & Inspection Requirements Australian/New Zealand Standard AS/NZS 2293:1995.
Emergency escape lighting and exit signs for buildings

Part 2: Inspection and maintenance

All maintenance records must be in the form of hard copy record tags or log books. Electronic copies may also be used.

Six Monthly Procedures

Visual checks of all emergency and exit lights in mains operation.
Check for operation of maintained exit lights and replace faulty lamps where required.
Where manual discharge test facility is present, operate the test switch and/or circuit breaker to simulate a power failure.
The emergency lighting system shall remain illuminated for not less than 90 minutes.
Restore the emergency and exit lights to normal charging condition.
Check operation of all maintained exit lights and all charge indicators.
Report any failures and record data in on site manuals.
Record data in electronic format for auditing processes.

Twelve Monthly Procedures

Carry out all checks as per six-monthly procedures.
Clean all emergency and exit lighting diffusers as required.
Visual checks to ensure that the emergency lighting system operates in correct relationship to the normal lighting in any designated area.

Read less...

To contact Perth TT about Exit Sign Testing & Inspection use Get a quote.