Epic - Hydraulic Under Driven Guillotines Get latest price

Read more...

To contact Epic Industries about Epic Hydraulic Under Driven Guillotines use Get a quote.

Unique hydraulic design eliminates the risk of machine twist. On the chance that material heavier then machine capacity is loaded, the machine will stop down travel on both ends of the machine immediately. This decreases any twisting force that can change the blade gap settings,

Double acting hydraulic clamps ensure the material is clamped, and the clamp is lifted off the material before the blade goes back up.

Safe secure material clamping allows the operator to cut anywhere along the machine table.

Machine capacities: 1.6mm – 4mm

Standard Features

• Adjustable table support bars with inserted ball transfers
• Unique hydraulic design for twist elimination
• Vee type full-length hydraulic bar clamp
• Double acting hydraulic clamps
• Safe secure material clamping
• European hydraulics
• Australian electrics
• Fabricated rear chute for offcut material
• D2 Australian-made blades
• Roving foot pedal control
• Front squaring arm and front sheet support
• Rear infrared guarding
• Top cutting beam guided by fully machined, heavy duty slides, brass lined for long life and an excellent cut (completely adjustable)
• Electrics on all external devices such as foot pedals and limit switches is kept to a safe operating voltage of 24 volts
• Grease points for lubrication
• Spare parts readily available Australia-wide

Optional Features

• Electronically controlled ball screw back gauge
• Ball transferred table system
• Flat plates to attach to original table support bars
• Flat machined table – ideal for stainless steel
• Shadow line system (Standard on 3070UD5 guillotines)
• Overhead lighting
• Pneumatic sheet supports
• Individual clamping cylinders
• Nolathane padded individual clamping system for delicate and non-malleable materials
• Vee belt padded bar clamping system for delicate and non-malleable materials
• Extended and extra squaring bar
• Necessary guarding to suit specific safety categories or requirements (eg for TAFE colleges, education and government departments)

Machine Lengths, Capacities [with Model No.s]

• 1250mm x 2mm, 4mm [Model No. 1250UD2, 1250UD4]
• 1860mm x 2mm, 4mm [Model No. 1860UD2, 1860UD4]
• 2500mm x 2mm, 4mm [Model No. 2500UD2, 2500UD4]
• 3070mm x 2mm, 4mm [Model No. 3070UD2, 3070UD4]
• 3675mm x 1.6mm, 3mm [Model No. 3675UD1.6, 3675UD3]
• 4020mm x 1.6mm, 3mm [Model No. 4020UD1.6, 4020UD3]

Read less...

To contact Epic Industries about Epic Hydraulic Under Driven Guillotines use Get a quote.