19 Recent Views In Stock

Termination Pillars come with: Circuit breakers cable or busbar, M.E.N and Earth Bar, cover panels and labelled components. In most cases, pillars are ready for cable connection on line and load.

Specifications:

Options	Details
Capability:	Designed for up to 50mm cable and a maximum of 240Amps
Overall size:	890mm x 417mm x 345mm
Weight:	16kg
Current:	A/C 50hz
Earthing:	Designed for direct earthing
Maximum voltage:	415/240Volt
Cover:	Green polyethylene lift off cover (465mm x 417mm x 345mm)
Ventilation:	Single vent on top of hood
Frame:	2mm hot dipped galvanised steel frame
Switch panel:	250mm x 350mm x 6mm
Studs:	4 x ½” studs each with 2 brass nuts, 2 x ½” washers, 1 x spring washer, 1 x flat washer & M.E.N Point included on one stud.
Lockable:	Suits power industry padlock (padlock not supplied)
Meets Australian Standards:	AS/NZS3439.1

To contact Current Industries about Current Industries Electrical Cabinets I MK2 Termination Pillar use Get a quote.

Termination Pillars come with: Circuit breakers cable or busbar, M.E.N and Earth Bar, cover panels and labelled components. In most cases, pillars are ready for cable connection on line and load.

Specifications:

Options	Details
Capability:	Designed for up to 50mm cable and a maximum of 240Amps
Overall size:	890mm x 417mm x 345mm
Weight:	16kg
Current:	A/C 50hz
Earthing:	Designed for direct earthing
Maximum voltage:	415/240Volt
Cover:	Green polyethylene lift off cover (465mm x 417mm x 345mm)
Ventilation:	Single vent on top of hood
Frame:	2mm hot dipped galvanised steel frame
Switch panel:	250mm x 350mm x 6mm
Studs:	4 x ½” studs each with 2 brass nuts, 2 x ½” washers, 1 x spring washer, 1 x flat washer & M.E.N Point included on one stud.
Lockable:	Suits power industry padlock (padlock not supplied)
Meets Australian Standards:	AS/NZS3439.1