Chipstar Wood Chipper | 180 MX

Chipstar - Wood Chipper | 180 MX

Supplier: Chipstar Australia

Wood Chipper | 180 MX

Australian built 7" Wood Chipper designed and manufactured in Melbourne.

In Stock

Standard Features

Kubota 45hp Watercooled Diesel
Solid Steel Construction
Hardened Tool Steel Knives
Fully Rotational Ejector Chute
High Performance Twin Rim Disc
Lift & Crush System (Twin Hydraulic Ram)
Auto Feed Reverse Auto & Feed Leave
Auto Feed Anti Stall System
Variable Roller Feed Speed (Feed Rate Governor)
Emergency Stop System (Engine & Rollers)
Fail Safe Lockout On Disc Housing
Double Pump Live Hydraulics
Centrifugal Clutch
Lockable Instrument Box
Easy Access & Removable Covers
Tow Hitch
Jockey Wheel
Handbrake
All Operators Controls On Kerbside
Fitted with Safety Knee Bar

Usability

High capacity processing, uniform chipping, and ease of access to the internal mechanics make the TP 400 PTO K the professional choice for forestry chipping. The model is also adjustable enough to accept sliver breakers should finer chipping be required.

Capacity Infeed
Capacity	7″ (180mm)
Feed Rate	Variable 35 lineal metres per minute (max)
Log Feed	Two hydraulic feed rollers with twin ram lift and crush
Feed Hopper	800mm high by 1200 wide with fold down tray (tailgate)
Discharge Chute	360 degree rotational
Chip Size	16mm variable
Infeed Distance	Operator to roller 1450mm
Throat Opening	180mm x 300mm
Engine
Standard	Kubota 4cyl. 45 Hp Diesel with engine cover and debris screens
Cooling	Water Cooled
Fuel Tank	40 Litres fitted with sight gauge
Air Cleaner	Dual Element with pre cleaner
Mounts	Rubber mounts on engine tray. Belt tension by single tension bolt.
Cutting Disc/Housing
Orientation	30° angle cut
Disc	High kinetic energy twin rim, 740mm diameter
Bearings	Twin row spherical roller 40 and 45mm diameter
Shaft	96mm at centre hub
Knives	4 knives of hardened tool steel, reversible and interchangeable 5 3/32″ long x 4″wide x 3/8″thick Full width cut across face of anvil
Speed	1400rpm
Anvil	4 sided, adjustable and replaceable
Instrumentation
Standard	Tach/hour meter, key star switch Auto shut-down engine protection. Adjustable autofeed level
Drive System
Standard	Centrifugal clutch
Disc Drive	3 belts
Electrical System
Voltage	12 VDC
Lights	Tail, brake, indicator (LED), number plate
Braking System
Standard	Hydraulic override or Electric
Hydraulic System
Tank	40 litres
Motor	400cc
Pump	2500 psi operating at 2000psi
Controls
Standard	Forward-Neutral-Reverse wrap around control bar Flow control to vary roller speed Twin cylinder hydraulic lift and crush system for top feed roller. Auto feed, anti-stall system. Emergency stop button (Stops engine and roller)
Trailer
Weight	1450kg (g.v.m.)
Length	3630mm (Tailgate Closed)
Height	2270mm
Width	1690mm
Operating Height	610mm (Nom.)
Axle	single independent rubber torsion
Tyres	175 R14LT
Wheels	14″ x 6″
Tow Hitch	50mm ball coupling and safety chains (adjustable height).
Jockey Wheel	Retractable
Finish
Colour	Powder coated
Warranty/Manuals
Warranty	24 months limited against defective materials, design and workmanship
Manuals	Operator, Hazard assessment, maintenance and spares

To contact Chipstar Australia about Chipstar Wood Chipper | 180 MX use Get a quote.

Standard Features

Kubota 45hp Watercooled Diesel
Solid Steel Construction
Hardened Tool Steel Knives
Fully Rotational Ejector Chute
High Performance Twin Rim Disc
Lift & Crush System (Twin Hydraulic Ram)
Auto Feed Reverse Auto & Feed Leave
Auto Feed Anti Stall System
Variable Roller Feed Speed (Feed Rate Governor)
Emergency Stop System (Engine & Rollers)
Fail Safe Lockout On Disc Housing
Double Pump Live Hydraulics
Centrifugal Clutch
Lockable Instrument Box
Easy Access & Removable Covers
Tow Hitch
Jockey Wheel
Handbrake
All Operators Controls On Kerbside
Fitted with Safety Knee Bar

Usability

Capacity Infeed
Capacity	7″ (180mm)
Feed Rate	Variable 35 lineal metres per minute (max)
Log Feed	Two hydraulic feed rollers with twin ram lift and crush
Feed Hopper	800mm high by 1200 wide with fold down tray (tailgate)
Discharge Chute	360 degree rotational
Chip Size	16mm variable
Infeed Distance	Operator to roller 1450mm
Throat Opening	180mm x 300mm
Engine
Standard	Kubota 4cyl. 45 Hp Diesel with engine cover and debris screens
Cooling	Water Cooled
Fuel Tank	40 Litres fitted with sight gauge
Air Cleaner	Dual Element with pre cleaner
Mounts	Rubber mounts on engine tray. Belt tension by single tension bolt.
Cutting Disc/Housing
Orientation	30° angle cut
Disc	High kinetic energy twin rim, 740mm diameter
Bearings	Twin row spherical roller 40 and 45mm diameter
Shaft	96mm at centre hub
Knives	4 knives of hardened tool steel, reversible and interchangeable 5 3/32″ long x 4″wide x 3/8″thick Full width cut across face of anvil
Speed	1400rpm
Anvil	4 sided, adjustable and replaceable
Instrumentation
Standard	Tach/hour meter, key star switch Auto shut-down engine protection. Adjustable autofeed level
Drive System
Standard	Centrifugal clutch
Disc Drive	3 belts
Electrical System
Voltage	12 VDC
Lights	Tail, brake, indicator (LED), number plate
Braking System
Standard	Hydraulic override or Electric
Hydraulic System
Tank	40 litres
Motor	400cc
Pump	2500 psi operating at 2000psi
Controls
Standard	Forward-Neutral-Reverse wrap around control bar Flow control to vary roller speed Twin cylinder hydraulic lift and crush system for top feed roller. Auto feed, anti-stall system. Emergency stop button (Stops engine and roller)
Trailer
Weight	1450kg (g.v.m.)
Length	3630mm (Tailgate Closed)
Height	2270mm
Width	1690mm
Operating Height	610mm (Nom.)
Axle	single independent rubber torsion
Tyres	175 R14LT
Wheels	14″ x 6″
Tow Hitch	50mm ball coupling and safety chains (adjustable height).
Jockey Wheel	Retractable
Finish
Colour	Powder coated
Warranty/Manuals
Warranty	24 months limited against defective materials, design and workmanship
Manuals	Operator, Hazard assessment, maintenance and spares