Centralised Oil Mist Filter | MT-32 for sale from Searose Environmental

Centralised Oil Mist Filter | MT-32

The MistTerminator (MT) is a modular filtration system that captures oil smoke/mist.

In Stock

If you need to handle both oil mist and oil smoke you require MT-32 that is equipped with additional HEPA filter. All MT filter units and filter banks are modular and can be tailored to your needs.

Product Features:

Intended for 1 – 2 work shift, light mode (processing parts at low and medium speed)
Suitable for processes involving contamination of coolant in the form of a thick sludge of metallic particles and burnt oil
Handles combined wet and dry metal processing
Not suitable for oils with a flash point below 150 °C (300°F)
Maximum initial oil concentration is 30 — 40 mg/m<sup>3</sup>
Filters have pressure indicator showing clogging level
Prepared for direct mounting of the fan on the filter
New mechanism for quick filter replacement during scheduled maintenance
Two input sockets for easy alternative duct installation

Processes and Applications:

Cutting, boring, drilling, honing using various metalworking equipment and CNC machine tools
Cold pressing and stamping operations
Hardening and wet grinding of metal

Product Restrictions:

Do not use the MT-31/MT-32 and MT-41/MT-42 for the following applications or in the following circumstances:

Aluminium laser cutting
Arc-air gouging
Paint mist
Extraction of hot gases (more than 45°C/113°F continuously)

To contact Searose Environmental about Centralised Oil Mist Filter | MT-32 use Get a quote.

If you need to handle both oil mist and oil smoke you require MT-32 that is equipped with additional HEPA filter. All MT filter units and filter banks are modular and can be tailored to your needs.

Product Features:

Intended for 1 – 2 work shift, light mode (processing parts at low and medium speed)
Suitable for processes involving contamination of coolant in the form of a thick sludge of metallic particles and burnt oil
Handles combined wet and dry metal processing
Not suitable for oils with a flash point below 150 °C (300°F)
Maximum initial oil concentration is 30 — 40 mg/m<sup>3</sup>
Filters have pressure indicator showing clogging level
Prepared for direct mounting of the fan on the filter
New mechanism for quick filter replacement during scheduled maintenance
Two input sockets for easy alternative duct installation

Processes and Applications:

Cutting, boring, drilling, honing using various metalworking equipment and CNC machine tools
Cold pressing and stamping operations
Hardening and wet grinding of metal

Product Restrictions:

Do not use the MT-31/MT-32 and MT-41/MT-42 for the following applications or in the following circumstances: