Campbell Scientific - Barometric Pressure Sensor | CS106

Barometric Pressure Sensor | CS106

The Campbell Scientific Barometric Pressure Sensor CS106, manufactured by Vaisala, measures barometric pressure for the range of 500 to 1100 hPa (mBar). This range equates to from below sea level (as in a mine) to over 15,000 feet above sea level.

17 Recent Views Call for more details

The CS106 uses Vaisala’s BAROCAP silicon capacitive sensor to measure barometric pressure. It is encased in a plastic shell (ABS/PC blend) fitted with an intake valve for pressure equilibration.

The CS106 outputs a linear signal of 0 to 2.5 Vdc, which allows the barometer to be directly connected to a Campbell Scientific datalogger. An internal switching circuit allows the datalogger to power the CS106 only during measurement, which reduces power consumption.

Benefits and Features

Optimized to mount in Campbell Scientific enclosures
Integral switching circuit limits power consumption to measurement cycle
Three-year warranty

Specifications

Pressure Range: 500 to 1100 hPa
Long-Term Stability: ±0.1 hPa per year
Settling Time: 1 s to reach full accuracy after power-up
Response Time: 500 ms to reach full accuracy after a pressure step
Output Voltage: 0 to 2.5 Vdc
Supply Voltage: 10 to 30 Vdc
Operating Temperature Range: -40° to +60°C
Dimensions: 6.8 x 9.7 x 2.8 cm (2.7 x 3.8 x 1.1 in.)
Cable Length: 76.2 cm (30 in.)
Weight: 90 g (3.2 oz)

To contact Campbell Scientific Australia about Campbell Scientific Barometric Pressure Sensor | CS106 use Get a quote.

The CS106 uses Vaisala’s BAROCAP silicon capacitive sensor to measure barometric pressure. It is encased in a plastic shell (ABS/PC blend) fitted with an intake valve for pressure equilibration.

Benefits and Features