Strip Door & Strip Curtain Suppliers in Hobart

Sizing depends on the dimensions of the opening and the intended use of the strip door. The width of the strip door should be at least as wide as the opening, and the height should be slightly taller than the tallest person or equipment that will be passing through. Generally, a standard strip door size is 8 feet tall by 4 feet wide, but custom sizes can be ordered to fit specific requirements. It's important to consider the thickness and material of the strips as well, as they can impact the durability and effectiveness of the strip door.

A strip door, also known as a vinyl strip curtain, is a cost-effective solution for maintaining temperature control and preventing the entry of dust, insects, and other contaminants in a commercial or industrial setting. Here are the steps to install a strip door:

• Measure the opening: Measure the width and height of the doorway or opening where you want to install the strip door. Make sure to account for any obstructions such as door frames or handles.
• Choose the right strip material: Select the appropriate strip material based on the purpose of the strip door, such as temperature control or insect prevention. You can also choose the thickness and width of the strips depending on the level of traffic and the size of the opening.
• Cut the strips: Use a sharp knife or scissors to cut the strips to the correct length. Make sure to leave a few extra inches on either end for mounting.
• Mount the strips: Hang the strips on a mounting bar or track, which can be attached to the door frame or the ceiling above the opening. Use screws or bolts to secure the mounting hardware.
• Adjust the overlap: Adjust the overlap of the strips so that they touch each other but do not cause friction or resistance when passing through.
• Test the door: Test the strip door by passing through it and checking for any air leaks or gaps. Make any necessary adjustments to the overlap or the mounting hardware.
• Maintain the strip door: Regularly clean and replace any damaged or worn-out strips to ensure the effectiveness of the strip door.

By following these steps, you can install a strip door to improve the efficiency and hygiene of your commercial or industrial space.

A strip door can be made from different materials depending on the application and environment. The most common materials used for strip doors are PVC, vinyl, and polyethylene. PVC strip doors are durable and can withstand extreme temperatures, making them suitable for industrial applications. Vinyl strip doors are lightweight and easy to install, making them ideal for commercial and residential use. Polyethylene strip doors are resistant to impact and abrasion, making them perfect for high-traffic areas. Other factors to consider when choosing a material for a strip door include transparency, UV resistance, and fire resistance.

Maintenance involves regular cleaning with a mild soap and water solution, avoiding harsh chemicals that can damage the strips. It's important to inspect the strips regularly for signs of wear or damage, and replace any damaged strips promptly to ensure optimal performance. Additionally, keeping the surrounding area clean and free of debris can help prolong the life of the strip door.

Yes, you can customize the length and width of your strip door. Many companies offer strip doors in various sizes and also offer custom-made options for specific applications. It is important to provide accurate measurements to ensure the strip door fits properly and functions effectively.

A strip door's lifespan depends on various factors, such as the quality of the material, the frequency of usage, and the environmental conditions it is exposed to. Generally, a strip door made of high-quality PVC material can last up to 7-10 years, even with frequent use in high-traffic areas. Therefore, proper maintenance and cleaning can extend the life of a strip door.

Visible damage: If the strips are torn, cracked, or damaged in any way, they need to be replaced.

• Poor seal: If the strips are not closing properly or there are gaps between them, it could be a sign that they need to be replaced.
• Wear and tear: If the strips are showing signs of wear and tear, it's a good idea to replace them before they become a safety hazard.
• Age: Over time, strip door material can become brittle and lose its flexibility. If your strip door is old, it may be time to replace the strips.

In general, it's a good idea to inspect your strip door regularly to ensure that it's functioning properly. If you notice any of the above signs, it's best to replace the strips as soon as possible to ensure the safety and efficiency of your door.

S can be used for outdoor applications, but they are not suitable for all outdoor environments. Strip doors made from PVC material are typically used for outdoor applications as they can withstand extreme temperatures and weather conditions. Additionally, proper installation and maintenance are also important to ensure the strip door remains effective and long-lasting.

A strip door, also known as a strip curtain, is a flexible barrier made up of overlapping PVC strips that allows for easy entry and exit while preventing the entry of unwanted elements such as dust, insects, and noise. To measure for a strip door, follow these steps:

• Measure the width of the door frame or the opening where you want to install the strip door. This is the distance between the two sides of the frame or opening.
• Measure the height of the door frame or the opening. This is the distance between the top and bottom of the frame or opening.
• Determine the number of strips needed for your strip door. This depends on the width of the strips you choose and the width of the opening. Generally, you'll want enough strips to fill the opening with a slight overlap.
• Choose the width of the strips based on your needs. Wider strips provide more insulation and durability, while narrower strips are easier to walk through.
• Order your strip door with the correct width and number of strips based on your measurements.

Install the strip door according to the manufacturer's instructions, making sure it is level and secure.

Costs vary depending on the size, material, and manufacturer. On average, a standard PVC strip door for a standard-sized doorway can cost anywhere from $50 to $300. It is important to consider the intended use and durability needed for the strip door when choosing a product and determining the cost.