Spill Mat Suppliers

A spill containment bund is a structure designed to contain spills and leaks of hazardous materials, chemicals, or liquids. It is typically made of concrete, steel, or plastic and is placed around storage tanks, drums, or other containers to prevent spills from spreading and contaminating the environment. The bund is designed to hold the entire volume of the container, plus an additional amount to allow for precipitation or other factors. Spill containment bunds are commonly used in industries such as oil and gas, chemical manufacturing, and transportation.

Spill containment bunds can be made of a variety of materials, including steel, concrete, plastic, and rubber. The choice of material depends on factors such as the type of liquid being stored, the size and location of the bund, and the environmental regulations in the area. Steel and concrete are commonly used for larger, permanent bunds, while plastic and rubber are often used for smaller, portable bunds. Each material has its own advantages and disadvantages in terms of durability, cost, and ease of maintenance.

The size of spill containment bund you need depends on the volume of the largest container or tank you plan to store. The bund should have a capacity of at least 110% of the volume of the largest container or tank. It is important to also consider any potential rainfall or run-off that may enter the bund and increase its volume. Local regulations may also dictate minimum size requirements for spill containment bunds.

Yes, spill containment bunds are required by law in Australia. The Environmental Protection Agency (EPA) and other regulatory bodies require businesses to have spill containment measures in place to prevent and contain spills of hazardous materials that could harm the environment or public health. The specific requirements for spill containment bunds vary depending on the industry and location, but they typically involve having a physical barrier or containment system in place to prevent spills from spreading and contaminating soil, waterways, or other sensitive areas. Failure to comply with spill containment regulations can result in fines, legal action, and damage to a company's reputation.

To install a spill containment bund, follow these steps:

• Choose the location: Select a flat and stable surface for the bund. Ensure that the area is free from any debris or obstacles that could damage the bund.
• Prepare the surface: Clean the surface and remove any loose materials. If required, level the surface to ensure that the bund sits evenly.
• Install the bund: Place the bund on the prepared surface. If the bund is made of modular panels, connect the panels securely. If the bund is made of a single piece, ensure that it is properly anchored to the ground.
• Seal the joints: If the bund is made of modular panels, seal the joints between the panels using a suitable sealant. This will prevent any spills from leaking through the joints.
• Test the bund: Fill the bund with water to test its integrity. Check for any leaks or weaknesses in the bund. If any issues are found, rectify them before using the bund.
• Mark the bund: Clearly mark the bund with appropriate signage to indicate its purpose and capacity.

Maintain the bund: Regularly inspect and maintain the bund to ensure that it remains in good condition and is ready for use in case of a spill.

A spill containment bund can handle various types of spills, including oil, chemicals, fuel, and hazardous materials. The type of bund required will depend on the specific substance being stored or transported. Bunds can be made from a variety of materials, including concrete, steel, and plastic, and can be designed to meet specific containment requirements. It is important to ensure that the bund is properly maintained and regularly inspected to ensure its effectiveness in preventing and containing spills.

To clean and maintain a spill containment bund, follow these steps:

• Regularly inspect the bund for any signs of damage or wear and tear.
• Remove any debris or contaminants from the bund using a broom or vacuum.
• Use a pressure washer or hose to wash down the bund, paying special attention to any areas where spills may have occurred.
• Use a mild detergent or degreaser to clean any stubborn stains or spills.
• Rinse the bund thoroughly with water and allow it to dry completely before use.
• Regularly check the bund for any signs of cracking or deterioration, and repair or replace as necessary.

It is important to regularly clean and maintain spill containment bunds to ensure they are effective in preventing spills from spreading and causing environmental damage.

Yes, spill containment bunds can be customized to fit specific needs. They can be designed to fit the size and shape of the area where they will be installed, and can be made from various materials depending on the type of liquid being contained. Additionally, they can be equipped with features such as drain valves, pumps, and alarms to enhance their functionality.

However, the cost of a spill containment bund can vary depending on factors such as size, material, and installation requirements. It is recommended to obtain quotes from multiple suppliers to determine the cost that best fits your specific needs.

When choosing a supplier for your spill containment bund, consider the following factors:

• Quality: Look for a supplier that offers high-quality spill containment bunds that meet industry standards and regulations.
• Customization: Choose a supplier that can customize the bund to fit your specific needs and requirements.
• Experience: Look for a supplier with experience in designing and manufacturing spill containment bunds.
• Price: Compare prices from different suppliers to ensure you are getting a fair price for the product.
• Customer service: Choose a supplier that offers excellent customer service and support, including after-sales service.
• Delivery time: Consider the supplier's delivery time and ensure they can deliver the bund within your required timeframe.

Reputation: Look for a supplier with a good reputation in the industry and positive customer reviews.