Safety Shower & Eye Wash Suppliers in Hobart

There are various types of safety showers and eye washes available in Australia, including:

• Combination safety shower and eye wash units: These are the most common types of safety showers and eye washes. They are designed to provide both an emergency shower and an eye wash station in one unit.
• Portable safety showers and eye washes: These units are designed for use in areas where a permanent safety shower or eye wash station is not practical or available. They can be moved to different locations as needed.
• Wall-mounted safety showers and eye washes: These units are permanently installed on a wall and are ideal for use in areas where space is limited.
• Ceiling-mounted safety showers and eye washes: These units are mounted on the ceiling and are designed for use in areas where there is no available wall space.
• Pedestal-mounted safety showers and eye washes: These units are mounted on a pedestal and are ideal for use in outdoor areas where there is no available wall or ceiling space.
• Hazardous material safety showers and eye washes: These units are designed for use in areas where hazardous materials are present. They are typically made of materials that are resistant to corrosion and chemical damage.

Overall, the type of safety shower and eye wash that is best for your workplace will depend on the specific hazards present and the layout of your facility. It is important to consult with a safety professional to determine the best type of safety shower and eye wash for your needs.

In Australia, safety showers and eye washes are required to comply with the Australian Standard AS 4775-2007 Emergency eyewash and shower equipment. This standard outlines the design, installation, maintenance, and testing requirements for safety showers and eye washes in workplaces.

• According to the standard, safety showers and eye washes must be located within 10 seconds of potential exposure to hazardous substances, and the water supply must be able to provide a minimum flow rate of 76 liters per minute for at least 15 minutes.
• The water temperature for safety showers and eye washes must be between 15 and 37 degrees Celsius, and the equipment must be designed to avoid causing further injury to the user.
• Regular maintenance and testing of safety showers and eye washes are also required to ensure they are functioning correctly and are ready for use in an emergency.

Employers have a legal obligation to provide adequate and appropriate safety equipment in their workplaces, including safety showers and eye washes, to protect their employees from potential hazards.

The recommended flow rate for safety showers and eye washes in Australia is 77 liters per minute for safety showers and 14 liters per minute for eye washes. This flow rate ensures that the user receives sufficient water to effectively flush chemicals or other hazardous substances from their body, minimizing the risk of injury or illness. It is important to regularly test and maintain safety showers and eye washes to ensure they are operating at the correct flow rate and are ready for use in an emergency.

Stations can be installed outdoors in Australia, but they must be designed and installed in accordance with relevant Australian Standards, as well as local regulations and codes. Outdoor safety showers and eye washes must be protected from extreme temperatures and weather conditions, and they must be located in a visible and accessible location. Additionally, they must be regularly inspected, tested, and maintained to ensure they are in proper working order in the event of an emergency.

In Australia, the recommended maintenance schedule for safety showers and eye washes is as follows:

• Inspection: Safety showers and eye washes should be inspected weekly to ensure that they are in good working condition. This includes checking for any damage or leaks, ensuring that the water flow is sufficient, and that the water is clean and free of contaminants.
• Testing: Once a month, safety showers and eye washes should be tested to ensure that they are functioning properly. This includes activating the shower or eye wash for a minimum of 1 minute to ensure that the water flow is consistent and that there are no blockages.
• Cleaning: Safety showers and eye washes should be cleaned regularly to prevent the buildup of dirt and debris. This includes cleaning the shower heads and nozzles, as well as the surrounding area.
• Maintenance: If any repairs or maintenance are required, they should be carried out promptly to ensure that the safety shower or eye wash is always in good working condition.

It is important to note that these are general guidelines, and the maintenance schedule may vary depending on the specific type of safety shower or eye wash, as well as the environment in which it is used. It is always important to follow the manufacturer's instructions and to consult with a qualified professional if you have any concerns about the maintenance of your safety shower or eye wash.

In Australia, the location of safety showers and eye wash stations is governed by Australian Standard AS 4775-200 The standard specifies that safety showers and eye wash stations should be located within a 10-second walk from potential exposure sources, such as chemical storage areas, laboratories, and workshops.

• The standard also requires that the path to the safety shower or eye wash station be clear of obstructions and that the station be clearly marked and visible from the exposure area. Additionally, the station should be located in an area with adequate lighting and ventilation.

In summary, the location of safety showers and eye wash stations in Australia must comply with the requirements specified in Australian Standard AS 4775-200 These requirements aim to ensure that the stations are easily accessible and visible in case of emergency.

The water supply for safety showers and eye washes should be able to provide a continuous flow of water for at least 15 minutes in order to ensure that any chemicals or hazardous materials that have come into contact with the skin or eyes can be thoroughly flushed away. This is a requirement of OSHA's Hazard Communication Standard and ANSI Z351-201 It is important to regularly check and maintain the water supply to ensure it meets this requirement in case of an emergency.

There are several types of activation methods for safety showers and eye washes, including:

• Pull-handle activation: This type of activation requires the user to pull a lever or handle to start the flow of water. This is the most common method of activation for safety showers and eye washes.
• Foot pedal activation: Some safety showers and eye washes are designed to be activated by a foot pedal. This can be useful in situations where the user's hands may be contaminated or unavailable.
• Push-button activation: Another option is a push-button activation, which requires the user to push a button to start the flow of water. This type of activation is less common, but can be useful in situations where the user may not be able to pull a lever or reach a foot pedal.
• Sensor activation: Some modern safety showers and eye washes are equipped with sensors that can detect when a user is in front of the unit and automatically start the flow of water. This type of activation is typically found in high-tech, automated facilities.

Regardless of the activation method, it's important to ensure that safety showers and eye washes are easily accessible and functioning properly to protect workers in case of emergency.

Choosing the right safety shower and eye wash for your workplace in Australia is crucial for ensuring the safety of your employees. Here are some factors to consider when making your decision:

• Type of Hazard: The type of hazardous material used and the potential exposure to it will determine the type of safety shower and eye wash required. For example, if your workplace deals with chemicals that can cause eye irritation, you may need a saline eye wash.
• Location: The location of the safety shower and eye wash is also important. It should be easily accessible and within reach of the potential hazard. If the hazard is located in a remote area, a portable unit may be needed.
• Water Source: Ensure that there is a reliable water source for the safety shower and eye wash. If there is no water source available, a self-contained unit may be needed.
• Compliance: Ensure that the safety shower and eye wash comply with Australian Standards. This will ensure that they are suitable for the intended use and meet the necessary safety requirements.
• Maintenance: Regular maintenance and testing of the safety shower and eye wash is necessary to ensure they are in good working condition and ready for use in case of an emergency.

By considering these factors, you can choose the right safety shower and eye wash for your workplace in Australia and ensure the safety of your employees.

Stations are required in workplaces where employees may be exposed to hazardous substances, chemicals, or materials. The installation requirements for safety showers and eye washes in Australia are governed by various regulations, including the Australian Standard AS 4775-2007 and the Work Health and Safety Regulations 201

• According to the AS 4775-2007, safety showers and eye washes should be installed at a location that is easily accessible and within 10 seconds of travel time from the hazardous area. They should also be installed at a height that is suitable for all employees, including those who are physically challenged.
• Additionally, the installation requirements for safety showers and eye washes in Australia include ensuring that the water supply is clean, potable, and free from contaminants. The water temperature should be between 15°C and 37°C, and the flow rate should be at least 75 liters per minute for safety showers and 6 liters per minute for eye washes.
• Regular maintenance and testing are also required to ensure that safety showers and eye washes are functioning correctly. This includes testing the water flow and temperature, checking for leaks, and ensuring that the equipment is clean and free from obstructions.

Overall, the installation requirements for safety showers and eye washes in Australia are designed to ensure that employees have access to effective and reliable emergency equipment in the event of a hazardous material exposure.