Anton Paar Cleveland Flash & Fire Point ...

Anton Paar - Cleveland Flash & Fire Point Tester - CLA 5

Supplier: Anton Paar Australia

Cleveland Flash & Fire Point Tester - CLA 5

The automatic Cleveland Open-Cup measures & describes the properties of a sample in response to heat and a test flame under controlled conditions as per standards ASTM D92, IP 36, AASHTO T48, ISO 2592 and JIS K 2265-4 for lubes & bituminous materials

Video for Anton Paar Cleveland Flash & Fire Point Tester - CLA 5

Automatically Lights up The Test Flame

Receive 4+ weeks from order

The automatic Cleveland Open-Cup (COC) measures and describes the properties of a sample in response to heat and a test flame under controlled conditions. The flash point measures the tendency to form a flammable mixture with air while the fire point indicates the tendency of sustained burning.
CLA 5 is suitable for flash and fire point applications of lubricants or bituminous material.

Key features

Benefits at a Glance

Memory for 1000 tests, 20 operators, 100 sample names, 21 test methods
Statistical analysis (Min, Max, Mean, Repeatability)
Measures flash points of silicone samples without any problems
Automatically lights up the test flame, relights it by an electric igniter and suppresses the gas source at the end of the test

Convenient Operation

Test initiation by pre-installed standard test methods and ability to customize methods by 10 user-defined programs.
Alert messages for out-of-spec results
Pt100 sample temperature probe calibration either by dynamic calibration against certified ASTM thermometer or by correction table with 21 calibration points.
Calibration protocol printout
5.7” color graphics display shows real-time measurement
Menu navigation by jog shuttle system with easy turn-and-push operation and color-coded LED indication for each operation mode
Data handling via USB stick for import into MS Excel® or to LIMS

Customized User Flexibility

PC-software FPPNet (optional) for convenient remote handling and test data storage
Automatic skin removal kit (optional)
Draft deflector (optional)
Stainless steel or glass (optional) sample temperature probe Pt100

Technical specifications

Application range	up to 400 °C (°C/°F selectable)
Ignition	Gas
Heating	According to methods, programmable and pre-heat mode
Detection of flash and fire point	Ionization detector
Sample temperature	Pt100 probe
Barometric pressure correction	Automatic correction
Safety	Overheat protection, automatic shut-off
Interfaces	3x USB, 1x RS232, LAN
Gas supply	50 mbar of propane or butane
Power supply	115 V/230 V, 50 Hz/60 Hz, 600 W
Dimensions	230 mm x 390 mm x 460 mm (W x D x H)
Weight	12 kg
Resolution	0.1 °C

Key features

Benefits at a Glance

Memory for 1000 tests, 20 operators, 100 sample names, 21 test methods
Statistical analysis (Min, Max, Mean, Repeatability)
Measures flash points of silicone samples without any problems
Automatically lights up the test flame, relights it by an electric igniter and suppresses the gas source at the end of the test

Convenient Operation

Test initiation by pre-installed standard test methods and ability to customize methods by 10 user-defined programs.
Alert messages for out-of-spec results
Pt100 sample temperature probe calibration either by dynamic calibration against certified ASTM thermometer or by correction table with 21 calibration points.
Calibration protocol printout
5.7” color graphics display shows real-time measurement
Menu navigation by jog shuttle system with easy turn-and-push operation and color-coded LED indication for each operation mode
Data handling via USB stick for import into MS Excel® or to LIMS

Customized User Flexibility

PC-software FPPNet (optional) for convenient remote handling and test data storage
Automatic skin removal kit (optional)
Draft deflector (optional)
Stainless steel or glass (optional) sample temperature probe Pt100

Technical specifications

Application range	up to 400 °C (°C/°F selectable)
Ignition	Gas
Heating	According to methods, programmable and pre-heat mode
Detection of flash and fire point	Ionization detector
Sample temperature	Pt100 probe
Barometric pressure correction	Automatic correction
Safety	Overheat protection, automatic shut-off
Interfaces	3x USB, 1x RS232, LAN
Gas supply	50 mbar of propane or butane
Power supply	115 V/230 V, 50 Hz/60 Hz, 600 W
Dimensions	230 mm x 390 mm x 460 mm (W x D x H)
Weight	12 kg
Resolution	0.1 °C

Read less...

To contact Anton Paar Australia about Anton Paar Cleveland Flash & Fire Point Tester - CLA 5 use Get a quote.

H05IP001EN-G_Datasheet_CLA5_screen(0.44MB)

XPTIP009EN-C_Brochure_Flashpoint_Testers_screen(6.29MB)

Let Anton Paar Australia provide you with a quote

Supplier

Get a quote

Supplier: Anton Paar Australia

Location: North Ryde, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Anton Paar Australia are also proudly displaying these credentials:

Location:

North Ryde , NSW

Joined:

Feb 2024

Level:

Premium Storefront

Verified:

Is this your product? Manage products / company details |

Report this product