Need maximum coverage from a PE safety beam? The SG19's multiple photoelectric beams are more effective than a single PE beam and a reliable substitute to safety loops. Easy to install the light curtain can cover a large area up to a height of 1800mm

90 Recent Views In Stock

Applications

SafePass SG19 Safety Light curtain is used where maximum coverage from a safety beam is required
Easy to install weatherproof design makes it suitable for all gates and doors in any location.

System consists of a self-contained transmitter and receiver positioned opposite of each other
Multiple beams are spaced to cover a total area up to a height of 1800mm and detect objects larger than 50mm diameter
Individual channels are adjusted automatically compensating for misalignment and contamination during operation
The transmitter and receiver units are optically synchronised
1-10 metre sensing range
40 parallel scanning beams
Active height of 1800 mm
Detector length of 1930 mm
Plug connection
Automatic sensitivity adjustment
Compact aluminium IP67 housing
Power, output and system status indicators
12-30 V dc supply voltage
5 wire solid state relay output
Test input
Dynamic sequential blanking function ignores the moving door

The advanced automatic signal-tracking (AST) feature ensures that no onsite setup or adjustments are required
Both the transmitter and receiver detectors are protected against reverse polarity of power supplies, control input and output signals
The output is also protected against short circuit and inductive loads
Housed in a compact, but sturdy, aluminium profiles, which are sealed to IP 67 waterproof specification.

SafePass SG19 Safety Beams	SG19TX Transmitter	SG19RX Reciever
Voltage 12-30 Vdc	12-30 Vdc
Current consumption	70 mA (RMS)	30 mA
Max output load Solid state	–	100 mA
Short circuit protected	–	Yes
Inductive load protection	–	Yes
Reverse polarity protected	Yes
Number of parallel beams	40
Active height	1800
Sensor spacing	45 mm
Response time	–	50 ms
Maximum sequential blanking speed	0,9 m/s
Minimum size of detectable objects	50 mm
Power on indicator	Green LED
Output indicator	–	Yellow LED
System status indicator	–	Red LED
Opening angle	–	+/– 10°
Emission angle	+/– 10°	–
Housing dimensions (w x d) G-profile	19,5 mm x 20,8 mm
Housing material Profile \| Lens Cover	Aluminium (black anodised) \| Polycarbonate
Connection	10m Cable and M12 Plug	10m cable and M12 Plug
Light immunity @ 5^o incidence	–	100 000 lux
Temperature operation	+20 to 65 ^oC
Sealing class	IP 67
Housing length	1948 mm
Active height	1800 mm
Connection Output	–	Solid State Relay (NC)

SafePass SG19 Safety Light curtain is used where maximum coverage from a safety beam is required
Easy to install weatherproof design makes it suitable for all gates and doors in any location.

System consists of a self-contained transmitter and receiver positioned opposite of each other
Multiple beams are spaced to cover a total area up to a height of 1800mm and detect objects larger than 50mm diameter
Individual channels are adjusted automatically compensating for misalignment and contamination during operation
The transmitter and receiver units are optically synchronised
1-10 metre sensing range
40 parallel scanning beams
Active height of 1800 mm
Detector length of 1930 mm
Plug connection
Automatic sensitivity adjustment
Compact aluminium IP67 housing
Power, output and system status indicators
12-30 V dc supply voltage
5 wire solid state relay output
Test input
Dynamic sequential blanking function ignores the moving door

The advanced automatic signal-tracking (AST) feature ensures that no onsite setup or adjustments are required
Both the transmitter and receiver detectors are protected against reverse polarity of power supplies, control input and output signals
The output is also protected against short circuit and inductive loads
Housed in a compact, but sturdy, aluminium profiles, which are sealed to IP 67 waterproof specification.

SafePass SG19 Safety Beams	SG19TX Transmitter	SG19RX Reciever
Voltage 12-30 Vdc	12-30 Vdc
Current consumption	70 mA (RMS)	30 mA
Max output load Solid state	–	100 mA
Short circuit protected	–	Yes
Inductive load protection	–	Yes
Reverse polarity protected	Yes
Number of parallel beams	40
Active height	1800
Sensor spacing	45 mm
Response time	–	50 ms
Maximum sequential blanking speed	0,9 m/s
Minimum size of detectable objects	50 mm
Power on indicator	Green LED
Output indicator	–	Yellow LED
System status indicator	–	Red LED
Opening angle	–	+/– 10°
Emission angle	+/– 10°	–
Housing dimensions (w x d) G-profile	19,5 mm x 20,8 mm
Housing material Profile \| Lens Cover	Aluminium (black anodised) \| Polycarbonate
Connection	10m Cable and M12 Plug	10m cable and M12 Plug
Light immunity @ 5^o incidence	–	100 000 lux
Temperature operation	+20 to 65 ^oC
Sealing class	IP 67
Housing length	1948 mm
Active height	1800 mm
Connection Output	–	Solid State Relay (NC)