High Pressure Pumps | 3 Series - 150-3 for sale from WOMA Australia

High Pressure Pumps | 3 Series - 150-3

Supplier: WOMA Australia

High Pressure Pumps | 3 Series - 150-3

The type 1503 high-pressure pump provides a maximum operating pressure of 200 bar and a maximum flow rate of 402 l/min.

Receive 1-3 days from order

Operating pressures up to 250 bar and nominal flow rates of up to 403 l/min make the high-pressure pumps of the 03-series specialists for descaling as well as for sewer and pipe cleaning.

In addition to the corrosion-resistant stainless steel variant, WOMA offers a cost-effective variant with gray cast iron.

The sealing system of this plunger pump is particularly service-friendly due to fewer wearing parts and easy maintenance. The ceramic plungers used are extremely resistant to acidic and basic fluids. Alternatively, the pump is available with coated steel plungers that offer increased wear resistance and resistance to thermal shocks. These features, together with the favorable price-performance ratio, make the pumps of the 03-series a good choice.

Technical data

Pump head: Cast iron / Stainless steel

Weight approx. 285 kg / 340 kg

Inlet pressure connection IG 3“ / SAE 3“ 3,000 psi

Pressure connection IG 1 ¼“ / SAE 1 ¼“ 6,000 psi

Cooling water connection IG 1“

Crankshaft max. 507 1/min, min. depends on operation parameters

Drive shaft diameter 50 mm k6, feather key DIN 6885 Sheet 1, A14 x 9 x 72

Torque at drive shaft max. 676 Nm

Moment of inertia J i = 2.96 → 0.042 kgm², i = 3.69 → 0.030 kgm², i = 4.57 → 0.022 kgm²

Centrifugal moment GD² i = 2.96 → 1.66 Nm², i = 3.69 → 1.17 Nm², i = 4.57 → 0.86 Nm²

Inlet pressure min. 1.5 bar, max. 5.0 bar

Pressure amplitude max. ±2.0 bar

Flow temperature min. +5 °C, max. +45 °C (higher temperatures on request)

Flow inlet requirement min. 1.5x nominal feed rate of the pump, dependent on the conversion set

Emission sound pressure level >80 dB(A), according to DIN EN ISO 11200

Oil capacity of transmission end approx. 9 l

Oil viscosity ISO VG under DIN 51517-2 or -3, 320 mm²/s

Oil pressure lubrication 2.5–5.0 bar (optional / performance related)

Oil pressure set value overflow valve 5.0 bar (optional / performance related)

Oil filter fineness 0.025 mm (optional / performance related)

Oil temperature max. 80 °C, set value 60–70 °C

Heat exchanger cooling water requirement approx. 5–10 l/min

Heat exchanger cooling water temperature min. +5 °C, max. +45 °C

Heat exchanger cooling water pressure min. 1.5 bar, max. 10 bar

To contact WOMA Australia about High Pressure Pumps | 3 Series - 150-3 use Get a quote.

Operating pressures up to 250 bar and nominal flow rates of up to 403 l/min make the high-pressure pumps of the 03-series specialists for descaling as well as for sewer and pipe cleaning.

In addition to the corrosion-resistant stainless steel variant, WOMA offers a cost-effective variant with gray cast iron.

Technical data

Pump head: Cast iron / Stainless steel

Weight approx. 285 kg / 340 kg

Inlet pressure connection IG 3“ / SAE 3“ 3,000 psi

Pressure connection IG 1 ¼“ / SAE 1 ¼“ 6,000 psi

Cooling water connection IG 1“

Crankshaft max. 507 1/min, min. depends on operation parameters

Drive shaft diameter 50 mm k6, feather key DIN 6885 Sheet 1, A14 x 9 x 72

Torque at drive shaft max. 676 Nm

Moment of inertia J i = 2.96 → 0.042 kgm², i = 3.69 → 0.030 kgm², i = 4.57 → 0.022 kgm²

Centrifugal moment GD² i = 2.96 → 1.66 Nm², i = 3.69 → 1.17 Nm², i = 4.57 → 0.86 Nm²

Inlet pressure min. 1.5 bar, max. 5.0 bar

Pressure amplitude max. ±2.0 bar

Flow temperature min. +5 °C, max. +45 °C (higher temperatures on request)

Flow inlet requirement min. 1.5x nominal feed rate of the pump, dependent on the conversion set

Emission sound pressure level >80 dB(A), according to DIN EN ISO 11200

Oil capacity of transmission end approx. 9 l

Oil viscosity ISO VG under DIN 51517-2 or -3, 320 mm²/s

Oil pressure lubrication 2.5–5.0 bar (optional / performance related)

Oil pressure set value overflow valve 5.0 bar (optional / performance related)

Oil filter fineness 0.025 mm (optional / performance related)

Oil temperature max. 80 °C, set value 60–70 °C

Heat exchanger cooling water requirement approx. 5–10 l/min

Heat exchanger cooling water temperature min. +5 °C, max. +45 °C

Heat exchanger cooling water pressure min. 1.5 bar, max. 10 bar

Read less...

To contact WOMA Australia about High Pressure Pumps | 3 Series - 150-3 use Get a quote.

Let WOMA Australia provide you with a quote

Supplier

Get a quote

Supplier: WOMA Australia

Location: Henderson, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. WOMA Australia are also proudly displaying these credentials:

Location:

Henderson , WA

Joined:

Oct 2020

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product