Dytran Current Source Power Unit | 4103C ...
The Dytran 4103C model is a current source power unit.
Firstly, IEPE sensors require a source of constant current. This is usually in the range of 2 to 20mA at supply and a voltage range of +18 to +30 VDC.
Secondly, the current source power unit supplies a fixed constant current to the sensor of 2 mA at +18 volts compliance level. Power to operate the sensor is by 2 x 9 volt dry cell batteries. To produce +18 Volts DC. A low current voltmeter located on the from panel of the 4103C constantly monitors the voltage appearing at the “sensor” jack. This DC voltage is used for testing faulty operation of cables and sensors. A push button located below the meter checks battery voltage without disturbing test in progress. Also both sensor and output jacks are BNC.
Features include:
To contact Metromatics about Dytran Current Source Power Unit | 4103C | Power Supply use Get a quote.
The Dytran 4103C model is a current source power unit.
Firstly, IEPE sensors require a source of constant current. This is usually in the range of 2 to 20mA at supply and a voltage range of +18 to +30 VDC.
Secondly, the current source power unit supplies a fixed constant current to the sensor of 2 mA at +18 volts compliance level. Power to operate the sensor is by 2 x 9 volt dry cell batteries. To produce +18 Volts DC. A low current voltmeter located on the from panel of the 4103C constantly monitors the voltage appearing at the “sensor” jack. This DC voltage is used for testing faulty operation of cables and sensors. A push button located below the meter checks battery voltage without disturbing test in progress. Also both sensor and output jacks are BNC.
Features include:
To contact Metromatics about Dytran Current Source Power Unit | 4103C | Power Supply use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product