Des-Case | Panel Unit for Filtration Systems ...

Des-Case | Panel Unit for Filtration Systems

Supplier: ProActive Maintenance Products

Panel units are ideal for mineral-based industrial fluids in small to medium-sized reservoirs with low flow rates.

23 Recent Views In Stock

Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to be filtered, the Des-Case panel unit is a made-to-order solution that can be mounted where you need it most.

Standard:

Automatic pressure relief valve
Non-bypass filter heads
Dual-stage filtration
Durable frame with drip pan for direct mounting
Industrial powder-coated paint
One-year warranty

Applications:

Decontaminating systems
Cooling systems
Collecting oil samples for analysis

Intended Use:

To be used for offline, secondary filtration and not inline filtration
In general industrial environments, both indoors and outdoors (IP rating of 54)
For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 104°F (-26°C to 40°C)
Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Performance

Operating Temperatures:

-40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC plumbing hoses
-20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic plumbing hoses and Viton or EPDM seals

Materials:

Frame: Carbon steel
Paint: Industrial powder coat
Filter Heads: Aluminum
Fittings: Zinc-plated steel and/or brass
Pumps: Aluminum/steel
Plumbing Hoses: Clear PVC with steel wire
Gaskets: Buna-N

Filter Indicators:

Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief:

Opens at 65 psi (5.49 bar)

Weight:

Approximately 110 to 135 lbs (50 to 61Kg). Will vary depending on options selected

Dimensions:

15.6"L x 23.4"W x 25.8"H

Viscosity Range:

Up to ISO VG 680 at 100°F/38°C (3000ssu/ 648cSt)

Intended Use:

To be used for offline, secondary filtration and not inline filtration
In general industrial environments, both indoors and outdoors (IP rating of 54)
For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 104°F (-26°C to 40°C)
Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Performance

Operating Temperatures:

-40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC plumbing hoses
-20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic plumbing hoses and Viton or EPDM seals

Materials: