Comac Section and Profile Rolling Machine ...

Comac - Section and Profile Rolling Machine - MODEL 304

Supplier: Delahenty Machinery

COMAC section roller 304 HV

COMAC section roller 304 HV P2 controller

COMAC section roller 304 HV

Comac bending machines are designed & manufactured with over 40-years experience, with the goal of providing top level performance, with high accuracy and repeatability, constant throughout the useful life of the machines and almost maintenance free.

In Stock

** 304HV model IN STOCK - one only **

- Machines compliant to 2006/42/CE standard
- 3 driving rolls to guarantee maximum drive on the profile
- Bending rolls independently adjustable, for double pre-bending capability on the leading and trailing end of symmetrical profiles
- Lateral guide rolls with three-dimensional adjustment
- Modular rolls that allow the bending of most profiles
- Standard bending rolls of alloy steel, heat treated to surface hardness 60 HRC
- Free standing remote control station to control the machine in safety
- Possibility to install the machine both in vertical and horizontal position
- One-piece fabricated steel frame
- Torque limiter installed on top roll shaft
- Shaft and pinions installed on high dynamic load roller bearings
- Gears coupled on splined shaft
- Water based environmental friendly paint

Section modulus [cm³] 10
Diameter of shafts (Upper/Lower) [mm] 60
Diameter of rolls [mm] 205
Power output [kW] 3,5
Rolling speed [m/min] 5,2
Weight [kg] 1090

Standard machines are controlled by means of a push button board that allows the variation of the position of the bending rolls and by a pedal that control the advance and retreat of the profile.

Depending on the deformation work to be performed, numerous additional controls are available like, for example, the hydraulic regulation of the lateral guide rolls, the speed regulation by means of a potentiometer, the double speed positioning of the bending rolls and the remote control of the special tooling.

In case a high repeatability is required or if particular bending geometries must be achieved, the machines are equipped with programmable positioner (NC), numerical controls with independent axes and numerical controls with interpolated axes (CNC).

To contact Delahenty Machinery about Comac Section and Profile Rolling Machine - MODEL 304 use Get a quote.

Section modulus [cm³] 10
Diameter of shafts (Upper/Lower) [mm] 60
Diameter of rolls [mm] 205
Power output [kW] 3,5
Rolling speed [m/min] 5,2
Weight [kg] 1090

Standard machines are controlled by means of a push button board that allows the variation of the position of the bending rolls and by a pedal that control the advance and retreat of the profile.

Read less...

To contact Delahenty Machinery about Comac Section and Profile Rolling Machine - MODEL 304 use Get a quote.

Comac- Catalogue series 3000 -301- 305(1.91MB)

Let Delahenty Machinery provide you with a quote

Supplier

Get a quote

Supplier: Delahenty Machinery

Distribution: Australia & New Zealand Only

Location: Knoxfield, VIC

Customers: Preston General Eng, Triple 8 Racing, ARB, Hilton, Norton Gates, Jayco, Nelson Global,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Delahenty Machinery are also proudly displaying these credentials:

Established:

1964

Employees:

6-20

Customers:

Preston General Eng, Triple 8 Racing, ARB, Hilton, Norton Gates, Jayco, Nelson Global,

Memberships:

AMTIL, Victorian Chamber of Commerce and Industry

Distribution:

Australia & New Zealand Only

Location:

Knoxfield , VIC