Fall Protection Lanyards Suppliers

A fall protection lanyard is a safety device that is used to protect workers who are working at heights from falling. It is a type of rope or strap that is attached to a harness worn by the worker and is connected to an anchor point. The lanyard is designed to absorb the shock of a fall and prevent the worker from hitting the ground. It is an essential piece of equipment for workers who are working on scaffolding, roofs, or other high places.

There are several types of fall protection lanyards available in Australia, including:

• Shock-absorbing lanyards: These lanyards are designed to absorb the shock of a fall, reducing the impact on the body.
• Retractable lanyards: These lanyards retract automatically, keeping the worker's movement unrestricted while still providing fall protection.
• Adjustable lanyards: These lanyards can be adjusted to different lengths, allowing workers to move freely while still being protected from falls.
• Restraint lanyards: These lanyards are designed to prevent falls by restricting the worker's movement to a safe area.
• Tie-back lanyards: These lanyards are used to anchor the worker to a fixed point, allowing them to work safely in areas where there is no other anchor point available.
• Rope lanyards: These lanyards are made of rope and are often used in situations where there is a risk of cutting or abrasion.

Webbing lanyards: These lanyards are made of webbing and are often used in situations where there is a risk of exposure to chemicals or other hazardous materials.

However, according to the previous regulations, the maximum length of a fall protection lanyard allowed in Australia was 2 meters. It is always recommended to check the latest regulations and guidelines from the relevant authorities before using any fall protection equipment.

However, the weight capacity of a fall protection lanyard depends on various factors such as the material used, the design, and the intended use. It is essential to consult the manufacturer's instructions and specifications to determine the weight capacity of a specific fall protection lanyard.

Fall protection lanyards are typically made from a combination of materials including nylon, polyester, and Kevlar. The webbing of the lanyard is usually made from nylon or polyester, which provides strength and durability. The shock-absorbing component of the lanyard is often made from Kevlar, which is a strong and lightweight material that can absorb the impact of a fall. The connectors or hooks on the lanyard are typically made from steel or aluminum for strength and durability.

In Australia, fall protection lanyards must comply with the AS/NZS 1891:2007 standard. This standard outlines the requirements for the design, testing, and use of personal protective equipment for fall arrest systems, including lanyards. Lanyards must be made of high-strength materials, have a minimum breaking strength of 15 kN, and be able to absorb the shock of a fall. They must also be inspected and maintained regularly to ensure they are in good working condition. Additionally, employers must provide adequate training and supervision to workers who use fall protection lanyards.

Choosing the right fall protection lanyard for your job involves considering several factors, including the type of work you will be doing, the height at which you will be working, the type of anchor point available, and the length and material of the lanyard. It is important to choose a lanyard that is appropriate for your specific job and meets all safety regulations and standards. Consulting with a safety professional or manufacturer can also help ensure that you choose the right lanyard for your needs.

However, according to OSHA regulations, fall protection lanyards should be inspected before each use and replaced if any damage or wear is detected. Additionally, they should be replaced every two years, even if no visible damage is present.

It is recommended to have a separate fall protection lanyard for each job to ensure that the equipment is properly maintained and inspected before each use. Using the same lanyard for multiple jobs can increase the risk of wear and tear, which can compromise its effectiveness and safety. It is important to prioritize safety and invest in the proper equipment for each job.

However, the cost of a fall protection lanyard in Australia can vary depending on the brand, material, and length. It is recommended to check with local suppliers or online retailers for current pricing information.