Amacan K | Submersible Motor Pump for sale from KSB Australia

Amacan K | Submersible Motor Pump

Supplier: KSB Australia

Amacan K | Submersible Motor Pump

Wet-installed submersible motor pump for installation in discharge tubes, with channel impeller, single-stage, single-entry. ATEX-compliant version available.

15 Recent Views In Stock

Application

Pumping pre-cleaned chemically neutral waste water, industrial effluent, sewage, fluids not containing any stringy substances, pre-treated by screens and overflow sills; as waste water, mixed sewage and activated sludge pumps in waste water treatment plants, irrigation and drainage pumping stations.

Main applications

Advanced treatment / 3.stage
Bio. treatment / 2.stage
Drainage pump stations
Flood / stormwater holding tanks
Flood control
Industrial waste water
Mech. treatment / 1.stage
Mining
Municipal waste water
Process
Sewage treatment plants
Surface drainage
Suspended solids treatment
Waste water
Waste water transport

Overview of technical data

Q (50Hz)	140.0 – 7,200.0 (m³/h)
H (50Hz)	1.0 – 30.0 (m)
Type of bearing	Rolling element bearings
Casing partition	Radially split
Drive	Electric motor
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	380 V, 400 V, 690 V, 3~
Explosion protection	ATEX II 2G T3
No. of impeller entries	Single entry
Impeller material (EN standard)	9.4460, JL 1040
Type of installation	Close-coupled
Type of coupling	None
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	40.0 (°C)
Nozzle position	In-line
Pump set location	Wet well
Shaft material (EN standard)	1.4021QT700, C45+N, 1.4057
Suction characteristics	Non-priming
Type of casing	Tubular casing
Type of impeller	Multi-vane impeller, Radial, Closed
Casing material (EN standard)	JL 1040
eClass assignment	36410103, 36410100, 36410000
Free passage	180.0 (mm)
Installation position	Vertical
Shaft seal type	Mechanical seal
Main applications	Water, Waste water / sewage, Mining / Dredges
Casing material	Cast iron
Maximum drive rating	320.0 (kW)
Type of installation	Stationary
Maximum speed of rotation	1200.0 (1/min)

Application

Main applications

Advanced treatment / 3.stage
Bio. treatment / 2.stage
Drainage pump stations
Flood / stormwater holding tanks
Flood control
Industrial waste water
Mech. treatment / 1.stage
Mining
Municipal waste water
Process
Sewage treatment plants
Surface drainage
Suspended solids treatment
Waste water
Waste water transport

Overview of technical data

Q (50Hz)	140.0 – 7,200.0 (m³/h)
H (50Hz)	1.0 – 30.0 (m)
Type of bearing	Rolling element bearings
Casing partition	Radially split
Drive	Electric motor
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	380 V, 400 V, 690 V, 3~
Explosion protection	ATEX II 2G T3
No. of impeller entries	Single entry
Impeller material (EN standard)	9.4460, JL 1040
Type of installation	Close-coupled
Type of coupling	None
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	40.0 (°C)
Nozzle position	In-line
Pump set location	Wet well
Shaft material (EN standard)	1.4021QT700, C45+N, 1.4057
Suction characteristics	Non-priming
Type of casing	Tubular casing
Type of impeller	Multi-vane impeller, Radial, Closed
Casing material (EN standard)	JL 1040
eClass assignment	36410103, 36410100, 36410000
Free passage	180.0 (mm)
Installation position	Vertical
Shaft seal type	Mechanical seal
Main applications	Water, Waste water / sewage, Mining / Dredges
Casing material	Cast iron
Maximum drive rating	320.0 (kW)
Type of installation	Stationary
Maximum speed of rotation	1200.0 (1/min)