ELGi Airmate Desiccant Air Dryer

ELGi - Airmate Desiccant Air Dryer

Airmate Desiccant Air Dryer

A heatless twin tower desiccant dryer operates by removing moisture through adsorption onto a granular desiccant bed from the air supply. As default, all HLD models above 5X are provided with the following options.

In Stock

Key Features:

Dew Point Stretch Cycle: It stretches the moisture loading time of the desiccant bed by increasing the drying time.
A dew point meter at the outlet with a required dew point setting provides the signal for the stretch cycle.
This reduces the purge air in accordance to the air flow and dew point chosen.
The purge occurs for the pre-programmed time during this time. Note – Dew point meter not in dryer scope.
Purge Optimizer: It reduces the percentage of regeneration flow based on the front panel setting.
It has 4 options 40%, 60%, 80% & 100% purge optimization cycles respectively.
The settings correspond to flow or moisture load through the dryer.
Separate LED Indicators for Tower Status, Purge Optimizer & Condensate Drain

To contact Advanced Air Compressors about ELGi Airmate Desiccant Air Dryer use Get a quote.

Key Features:

Dew Point Stretch Cycle: It stretches the moisture loading time of the desiccant bed by increasing the drying time.
A dew point meter at the outlet with a required dew point setting provides the signal for the stretch cycle.
This reduces the purge air in accordance to the air flow and dew point chosen.
The purge occurs for the pre-programmed time during this time. Note – Dew point meter not in dryer scope.
Purge Optimizer: It reduces the percentage of regeneration flow based on the front panel setting.
It has 4 options 40%, 60%, 80% & 100% purge optimization cycles respectively.
The settings correspond to flow or moisture load through the dryer.
Separate LED Indicators for Tower Status, Purge Optimizer & Condensate Drain

To contact Advanced Air Compressors about ELGi Airmate Desiccant Air Dryer use Get a quote.